1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us


Fence Tools Left Side Menu
 

All content copyright
Hoover Fence Co. and
Hoover Enterprises
4521 Warren Rd.
Newton Falls, OH 44444
Phone: (330)358-2335
Toll Free Orders: 1-800-355-2335



We accept all major credit cards

Chain Link Bridge Fittings
Aluminum Square Fittings

Line Clamps are similar to round line rail clamps, or boulevards as they are often called, only they are made for square pipe or tubes instead of round. Designed for construction of bridge protection screens but can be used for other applications as well. Simply put, these fittings form a 'plus' '+' with two pieces of pipe or tube. Line Clamps are available for 2" and 2-1/2" posts. Both sizes accept 1-1/2" mid rail or bottom rails. Two-piece clamps 'sandwich' the pipe and two nuts and bolts are installed to clamp the tubing in place. A third bolt fastens the fitting to the post itself. Carriage bolts and nuts are sold separately.

Click illustration at right for line clamp fittings specifications.

Click here for a detailed illustration of a typical installation using bridge fittings.

DC-DC-1 Requires (2) 3/8" x 2-1/2" and (1) 3/8" x 3" carriage bolts and nuts per fitting (not included).
PC-PC-1 Requires (2) 3/8" x 2-1/2" and (1) 3/8" x 3-1/2" carriage bolts and nuts per fitting (not included).

 

Line Clamp Fittings

Line Clamps

Code Size Price View Cart
CLA-DC-DC-1 2" Line Clamp $ Add To Cart
CLA-PC-PC-1 2-1/2" Line Clamp $ Add To Cart

 

End Clamps are similar to line rail clamps only they are made for fitting end posts accepting a mid rail or bottom rail on one side only. Designed for construction of bridge protection screens but can be used for other applications as well. End Clamps are available for 2" and 2-1/2" posts. Both sizes accept 1-1/2" mid rail or bottom rails. Two-piece clamps 'sandwich' the pipe and a nut and bolt are installed to clamp the tubing in place. A third bolt fastens the fitting to the post itself. Carriage bolts and nuts are sold separately.

Click illustration at right for end clamp fittings specifications.

Click here for a detailed illustration of a typical installation using bridge fittings.

BC Requires (1) 3/8" x 2-1/2" and (1) 3/8" x 3" carriage bolts and nuts per fitting (not included).
EC Requires (1) 3/8" x 2-1/2" and (1) 3/8" x 3-1/2" carriage bolts and nuts per fitting (not included).

 

End Clamp Fittings

End Clamps

Code Size Price View Cart
CLA-BC 2" End Clamp $ Add To Cart
CLA-EC 2-1/2" End Clamp $ Add To Cart

 

Top Caps are designed for construction of bridge protection screens but can be used for other applications as well. Top caps fit a 2" post and secures a 1-1/2" top rail above the post. The top cap fastens with two carriage bolts, one to secure the top rail and the other to fasten the top cap to the post. Carriage bolts and nuts are sold separately.

Click illustration at right for top cap fitting specifications.

Click here for a detailed illustration of a typical installation using bridge fittings.

TC Requires (1) 3/8" x 2-1/2" and (1) 3/8" x 3" carriage bolts and nuts per fitting (not included).

 

Top Cap Fitting

Top Caps

Code Size Price View Cart
CLA-TC 2" Post,
1-5/8" Rails
$ Add To Cart

 

Note: Items are custom fabricated and for that reason, once an order is placed, orders cannot be altered or cancelled. Items are not non-returnable.

Note: These photos are for demonstration purposes only, actual size and design may vary slightly.

Order Online Using Our Secure Shopping Cart or Call Hoover Fence Co. 1-800-355-2335