[CONTENTS] [<<Page 26] Page 27 [Page 27a>>]
Industrial Butt Hinges
For Commercial Chain Link Gates
Malleable & Pressed Steel - Galvanized
Malleable and pressed steel butt hinges are commonly used on commercial and industrial chain link gates, tubular barrier gates, and prefabricated panic bar gates. Also called box hinges, these hinges are easy to install, adjust, and provide for years of trouble free performance.
Chain link gate hinges are priced per hinge, not by the pair. Two are required for most single gates, four are required for most double gates. Gates taller than 8' should have three hinges per leaf. These hinges will fit 1-5/8" O.D. and 2" O.D. gate uprights simply by moving the collar on hinge. Hinges are very easy to install and are suitable if gates are to be automated. The larger portion of the hinge simply bolts around the gate post. The smaller portion, or collar, wraps around gate upright. The collar does not fit snug around gate. The hinge must be positioned so that one of the horizontal rails rests on the collar. You may bolt hinges just below the top horizontal rail, or build your gates so that they have a longer leg on one side to slide into the butt hinge. Industrial butt hinges have a space allowance of approximately 1-7/8".
These hinges allow for a 90 degree swivel in either direction. To allow hinges to swing a full 180°, you will need one 180° hinge adapter per hinge. 180° adapters are easy to install. The U-bolts bolt around gate frame, 1-5/8" or 2", and the 'leg' portion simply slides into butt hinge. Pictured at right is a standard industrial pressed steel butt hinge with a 180º adapter installed.
Industrial chain link butt hinges are sold individually and by the bag.
(Post x Frame)
|BHM-25||2-1/2" x 1-5/8" or 2"||4.0 lbs||12||$||Add to Cart|
|BHM-3||3" x 1-5/8" or 2"||4.0 lbs||12||$||Add to Cart|
|BHM-35||3-1/2" x 1-5/8" or 2"||4.3 lbs||12||$||Add to Cart|
|BHM-4||4" x 1-5/8" or 2"||4.5 lbs||12||$||Add to Cart|
|BHM-65||6-5/8" x 1-5/8" or 2"||11.4 lbs||4||$||Add to Cart|
|BHM-85||8-5/8" x 1-5/8" or 2"||16.5 lbs||4||$||Add to Cart|
|BHP-25||2-1/2" x 1-5/8" or 2"||3.70 lbs||12||$||Add to Cart|
|BHP-3||3" x 1-5/8" or 2"||4.30 lbs||12||$||Add to Cart|
|BHP-4||4" x 1-5/8" or 2"||6.80 lbs||12||$||Add to Cart|
Note: These photos are for demonstration purpose only, actual size and design may vary slightly.
Order Online Using Our Secure Shopping Cart or Call Hoover Fence Co. 1-800-355-2335
Important Disclaimer: Hoover Fence Co. strives to be accurate in
depicting all products featured on our website. Pricing, specifications,
and availability are subject to change without notice.
Copyright 1995-2013 Hoover Enterprises, Inc. - All Rights Reserved.
www.HooverFence.com. Striving to be the
fence and fencing materials retailer
and distributor of
ornamental cast iron and aluminum fencing,
gate operators and
access control, garage door openers and
replacement parts, and
Vinyl (PVC) fencing for
home and garden security,
horses, farms, and ranches, We carry:
American Access Systems™,
Genie™ and many others.