[CONTENTS] [<<Page 44] Page 45 [Page 46>>]
Gate Corners
Aluminum & Pressed Steel
Chain link gate corners are used for residential and commercial gates. Fitting is suitable for all single walk gates and double chain link gates; for larger size gates and double drives, also install a truss cable to prevent gate from sagging. Both aluminum and steel gate corners have holes in the inside of the corner to connect a truss wire/ cable. Tighten truss wire with a turnbuckle. Residential 1-3/8" pipe frames insert snugly, simply install self-tap screws to finish frame. Gates wider and or taller than 5' should also have a center brace. You may install a center brace using end rail clamps and/ or line rail clamps. Click images below to enlarge.
| Aluminum Gate Corner  |
Code | Size | Weight | Price | View Cart |
| CL-GCA-13H | 1-3/8" x 1-3/8" | 0.41 lbs | $2.34 | Add to Cart |
Chain link pressed steel gate corners are less likely to crack under stress and abuse. Order (2) top corners and (2) bottom corners per gate. Residential pressed steel gate corners are 14 gauge galvanized steel.
| Residential Pressed Steel Gate Corner  |
Code | Size | Weight | Price | View Cart |
| CL-GCP-13T | 1-3/8" x
1-3/8" Top |
0.71 lbs | $3.58 | Add to Cart | |
| CL-GCP-13B | 1-3/8" x
1-3/8" Bottom |
0.81 lbs | $3.58 | Add to Cart |
Chain link pressed steel gate corners are less likely to crack under stress and abuse. Order four corners per gate. Industrial pressed steel gate corners are 12 gauge galvanized steel. Use self-tap screws or bolts to hold gate corner to frame.
| Industrial Pressed Steel Gate Corner |
Code | Size | Weight | Price | View Cart |
| CL-GCP-15 | 1-5/8'' | 1.5 lbs | $6.56 | Add to Cart | |
| CL-GCP-2 | 2" | 1.9 lbs | $6.86 | Add to Cart |
Note:These photos are for demonstration purpose only, actual size and design may vary slightly.
Order Online Using Our Secure Shopping Cart or Call Hoover Fence Co. 1-800-355-2335
