|
|
 Model 1601 & 1602 Parking
Gate OperatorModels 1601 and 1602 parking
gate operators use all solid state microprocessor control boards to eliminate the
troublesome relays and limit switches. Magnets mounted on the output shaft activate a
magnetic sensor providing unique non-mechanical maintenance free limits. These operators
were designed so that all the electronics are mounted high in the cabinet to protect from
possible water damage. The motor and gear box are mounted low so that the operator is not
top heavy. Units available with battery backup drive system to automatically raise
the arm during a power outage. The 1601 operator can be ordered with a wood, plastic,
or aluminum arm. Folding arm kits are available for both the wood and plastic
arms. The 1602 operator uses a wishbone style wood arm. For extreme climatic
conditions (hot or cold), fan and heater kits are available. The Gate Tracker™
output allows the 1601 and 1602 operators to communicate with an 1835 or 1838 access system to
generate gate operator activity reports. Traffic
Spikes are also available to control one way traffic. Control board accepts many
optional control devices available in the Entry Control
section of our site. Read the manual for more information. |
Features:
Specifications:
Options:
|
|
| Prices and Ordering: |
| Note: To order the
1601 operator system, follow these simple steps: 1) Select operator required. 2) Select appropriate hardware kit for the type of arm you are using. 3) Select arm type required. 4) Select any options you may require. The 1602 has only one arm choice available, no hardware kit required, included with operator. |
| Step 1 - Select Operator(s) |
| CODE | DESCRIPTION | PRICE | |
| 1601-080 | Model 1601
Barrier Gate Operator - 1/2 HP 115 VAC
commercial unit Single arm maximum length 14 feet. G90 galvanized steel cabinet painted white. OPERATOR ONLY, SELECT ARM FROM BELOW |
$2139.00 | Add to Cart |
| 1601-081 | Model 1601
Barrier Gate Operator with battery backup Same as 1601-080 but includes a battery powered drive system designed to open the gate during power outages. |
$2774.50 | Add to Cart |
| 1601-087 | Model 1601
Barrier Gate Operator - 1/2 HP 230 VAC
commercial unit Single arm maximum length 14 feet. G90 galvanized steel cabinet painted white. OPERATOR ONLY, SELECT ARM FROM BELOW |
$2472.25 | Add to Cart |
| 1601-088 | Model 1601
Barrier Gate Operator with battery backup Same as 1601-087 but includes a battery powered drive system designed to open the gate during power outages. |
$3107.75 | Add to Cart |
| 1602-080 | Model 1602
Barrier Gate Operator - 1 HP 115 VAC
commercial unit Single arm maximum length 20 feet. G90 galvanized steel cabinet painted white. OPERATOR ONLY, SELECT ARM FROM BELOW |
$3014.75 | Add to Cart |
| 1602-081 | Model 1602
Barrier Gate Operator with battery backup Same as 1602-080 but includes a battery powered drive system designed to open the gate during power outages. |
$3650.25 | Add to Cart |
| 1602-082 | Model 1602
Barrier Gate Operator - 1 HP 230 VAC
commercial unit Single arm maximum length 20 feet. G90 galvanized steel cabinet painted white. OPERATOR ONLY, SELECT ARM FROM BELOW |
$3348.00 | Add to Cart |
| 1602-083 | Model 1602
Barrier Gate Operator with battery backup Same as 1602-082 but includes a battery powered drive system designed to open the gate during power outages. |
$3983.50 | Add to Cart |
| The 230 VAC operators use a step-down
transformer to achieve 115 VAC operating voltage. |
| Step 2 - Select Hardware Kit |
| CODE | DESCRIPTION | PRICE | |
| 1601-240 | Wood Arm Hardware Kit (Arm NOT included) | $98.00 | Add to Cart |
| 1601-241 | Plastic Arm Hardware Kit (Arm NOT included) | $98.00 | Add to Cart |
| 1601-242 | Aluminum Arm Hardware Kit (Arm NOT included) | $119.00 | Add to Cart |
| Arm hardware kits include the arm mounting hub,
the appropriate arm mounting bracket, and necessary hardware. |
| Step 3 - Select Arm |
| CODE | DESCRIPTION | PRICE | |
| 1601-048 | 14 Foot Wood Arm - 1 x 4, 14 foot kiln dried wood arm, painted white with black and yellow striped tape. Use with Model 1601 operators. | $68.20 | Add to Cart |
| 1601-084 | Wood Arm and Folding Bracket Assembly - Bracket adapts to the 1601 and wood arm to allow operation in areas where low ceiling height is a problem. Includes two piece wood arm. | $243.35 | Add to Cart |
| 1601-071 | 12 Foot Plastic Arm - 2.5 x 2.5, 12 foot white PVC arm with black and yellow striped tape. Use with Model 1601 operators. | $41.85 | Add to Cart |
| 1601-083 | Plastic Arm and Folding Bracket Assembly - Bracket adapts to the 1601 and plastic arm to allow operation in areas where low ceiling height is a problem. Includes 2-piece plastic arm | $243.35 | Add to Cart |
| 1601-216 | 14 Foot Aluminum Arm - Round 3" diameter, 14 foot white aluminum arm with black and yellow striped tape. Use with Model 1601 operators. | $167.40 | Add to Cart |
| 1602-040 | 20 Foot Wood Arm Assembly - Three piece arm in a wishbone arrangement made of 1 x 4 kiln dried wood, painted white with black and yellow striped tape. Use with Model 1602 operator only. | $251.10 | Add to Cart |
| Prices are for arms ordered at same time as
operators, replacement arms ordered without operators require shipping quote. |
| Step 4 - Select Options |
| CODE | DESCRIPTION | PRICE | |
| 1601-092 | Heater Kit - Thermostatically controlled heater should be used when the 1601 or 1602 is installed in areas where the temperature routinely fall below 10°F (-12°C) | $165.20 | Add to Cart |
| 1601-093 | Fan Kit - Thermostatically controlled fan should be used in areas where hot, humid environments are common. | $165.20 | Add to Cart |
| 1601-260 | Foam Padding Kit - Fits 1601-048 wood arm and 1601-216 aluminum arm for 1601 operator | $59.50 | Add to Cart |
| 8080-016 | Reversing Edge - Six foot long reversing edge mounts on bottom of arm to reverse travel if contact is made with vehicle. Fits 1601-048 wood arm for 1601 operator. | $157.85 | Add to Cart |
|
