Parking Gate Operator - Model 1601 - HOOVER FENCE CO. - Model 1601 parking gate operator uses an all solid state microprocessor control board to eliminate the troublesome relays and limit switches. Magnets mounted on the output shaft activate a magnetic sensor providing unique non-mechanical maintenance free limits. The operator was designed so that all the electronics are mounted high in the cabinet to protect from possible water damage. The motor and gear box are mounted low so that the operator is not top heavy. The battery backup drive system (optional) automatically raises the arm during power outages. The operator can be ordered with a wood or PVC arm. Folding arm kits are available for both the wood and plastic arms. For extreme climatic conditions (hot or cold), fan and heater kits are available. The Gate Tracker output allows the 1601 to communicte with an 1815, 1817, or 1818 access system to generate gate operator activity reports. This page has been changed, you will be redirected to the new page.