1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Return

Wiring EMX-D-TEK-BOX Vehicle Loop Detector and GTO/Pro Gate Operator

The EMX D-Tek and the GTO/Pro Gate Operator can be used together for several different functions, and we at Hoover Fence Co. will try and outline the different applications and how the 2 products can be used together. NOTE: Only one function is accessible at a time.  You can not use a single D-Tek for free exit AND safety.  You will need to purchase another.

FREE EXIT - The D-TEK and a loop and be used to make the gate operator function to open the gate with a vehicle approaches the gate.   If the gate is in the open position and begins to close, the activation of the D-Tek box will reopen the gate.  If the gate is in the open position and the loop is broken by the path of a vehicle, the gate will not close.  To hook the D-Tek up as a free exit/entry device:

EMX D-TEK

LOOP

GTO/PRO Accessory Terminal
Pin 1 - White - Power - Terminal 1 on battery
Pin 2 - Black - Power - Terminal 2 on battery
Pin 4 - Green - Ground Uncolored - shield Ground out in control box
Pin 5 - Yellow - Presence Relay Comm. - Green
Pin 6 - Blue - Presence Relay N.O. - Blue
Pin 7 - Gray - Loop Black -
Pin 8 - Brown - Loop White -

SAFETY LOOP - When the loop is broken the gate will remain open or reopen if closing.  The activation of the loop will never open the gate when hooked up to these terminals in the GTO/Pro gate operator.

EMX D-TEK

LOOP

GTO/PRO Accessory Terminal
Pin 1 - White - Power - Terminal 1 on battery
Pin 2 - Black - Power - Terminal 2 on battery
Pin 4 - Green - Ground Uncolored - shield Ground out in control box
Pin 5 - Yellow - Presence Relay Comm. - Orange
Pin 6 - Blue - Presence Relay N.O. - Green
Pin 7 - Gray - Loop Black -
Pin 8 - Brown - Loop White -