 Commercial
Telephone Entry System with Access ControlThe Model AE1000Plus
Commercial Telephone Entry System with Access Control is designed for use as a primary
access control device for gated communities, parking garages, office buildings,
apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.
Housed in a locked, rugged stainless steel faced enclosure, the AE1000Plus features a
side-lit 12-key telephone style keypad with bright, easy-to-read graphics, a backlit
two-line directory display with programmable welcome message, a built-in microphone,
speaker, and provision for an optional Model CCM-1 color CCTV camera. The cabinet is
monitored with a magnetic tamper switch. The four relay output channels can be programmed
to control electric door strikes, magnetic locks, door & gate operators, or barrier
gates. The system utilizes hands-free, full duplex telephone communications between
visitors and residents for granting access. Complete access control event logging, access
time restriction, access location restriction, and administration functions are also
available to manage the installation. For easy programming, the AE1000Plus contains
Linear's built-in browser-based AXNET software. The system can be programmed and
maintained from any computer world-wide, without using dedicated computer software. The
AE1000Plus is also compatible with Linear’s powerful AccessBase2000 dedicated access
control PC software. The AE1000Plus is network ready. AE1000Plus units can be
interconnected with Linear’s AM3Plus and AE2000Plus Telephone Entry Systems through a
3-wire RS-485 or modem network. The AE1000Plus can be used in networks with the legacy
AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with
AccessBase2000 software only. Two Wiegand inputs are available for connection of 26, 30,
or 31bit Wiegand devices (card readers, etc.). Three sets of PBUS inputs are available for
connection to Linear’s line of remote accessories. |
Capabilities with AXNET
Programming
Programming using any PC and Internet browser software
Up to 2,000 cardholders
Up to 24 card blocks with up to 1,600 cards each (38,400 total)
Up to 2,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
Up to 2,000 individually enrolled transmitters
Up to 2,000 key codes
Up to 2,000 telephone directory codes
2,500 event log entries per unit
Up to 8 access time zones
Up to 4 PBUS devices per unit |
Capabilities with
AccessBase2000 Programming
Programming using a dedicated PC and AccessBase2000 software
Up to 10,000 cardholders grouped in sets
Up to 24 card blocks with up to 1,900 cards each (45,600 total)
Up to 20,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
Up to 20,000 individually enrolled transmitters
Up to 20,000 entry codes for cardholders
Up to 10,000 telephone directory codes for cardholders
10,000 event log entries per unit
Up to 31 access time zones
Up to 6 PBUS devices per unit |
Features:
 Full control of 4 doors; each supporting request to exit and
door status monitoring - Housed in a locked, rugged stainless steel face enclosure
- Side-lit 12-key telephone style keypad
- Back-lit two-line directory display with programmable display messages
- Built-in microphone and speaker
- Built-in RF receiver
- RF frequency: 318 MHz
- Many installation choices: surface, gooseneck, and recessed
(with TR-1000 trim ring)
 Programmable directory code length and talk time; extended
talk time allowed per cardholder - Direct input for 2 card readers; add AM-CRI's for more
- Local or remote programming using a PC
- Relay auto lock/unlock schedules
- Automatic door relock when door sense input is used
- Extensive ESD and lightning protection of all inputs and
outputs
- Cabinet tamper switch included; tamper events are tracked in
the event log
- All data memory is non-volatile FLASH with data retention in excess of 10
years
-
 13" W x 16.75" H x 3.5" D
- Operating Temperature: -22º to
+149º F
- Brochure
- Installation
Instructions
- User
Instructions
- AXNET
Installation and User's Guide
- System
Configuration Selector
- Compatible
MegaCode Transmitters - 318 Mhz, BLOCK CODED ONLY
|
|
