 Commercial
Telephone Entry System with Access ControlThe Model AE2000Plus
Commercial Telephone Entry System with Access Control is designed for use as a primary
access control device for gated communities, parking garages, office buildings,
apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.
Housed in a locked, rugged stainless steel faced enclosure, the AE2000Plus features a
lighted keypad with bright, easy-to-read graphics, a large backlit display with
programmable welcome message, a built-in microphone, speaker, and provision for an
optional Model CCM-1 color CCTV camera. The cabinet is monitored with a magnetic tamper
switch. The four relay output channels can be programmed to control electric door strikes,
magnetic locks, door & gate operators, or barrier gates. The system utilizes
hands-free, full duplex telephone communications between visitors and residents for
granting access. Complete access control event logging, access time restriction, access
location restriction, and administration functions are also available to manage the
installation. For easy programming, the AE2000Plus contains Linear's built-in
browser-based AXNET software. The system can be programmed and maintained from any
computer world-wide, without using dedicated computer software. The AE2000Plus is also
compatible with Linear’s powerful AccessBase2000 dedicated access control PC
software. The AE2000Plus is network ready. AE2000Plus units can be interconnected with
Linear’s AM3Plus and AE1000Plus Telephone Entry Systems through a 3-wire RS-485 or
modem network. The AE2000Plus can be used in networks with the legacy AM-3, AE-1000, and
AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software
only. Two Wiegand inputs are available for connection of 26, 30, or 31-bit Wiegand devices
(card readers, etc.). Three sets of PBUS inputs are available for connection to
Linear’s line of remote accessories. |
Capabilities with AXNET
Programming
Programming using any PC and Internet browser software
Up to 2,000 cardholders
Up to 24 card blocks with up to 1,600 cards each (38,400 total)
Up to 2,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
Up to 2,000 individually enrolled transmitters
Up to 2,000 key codes
Up to 2,000 telephone directory codes
2,500 event log entries per unit
Up to 8 access time zones
Up to 4 PBUS devices per unit |
Capabilities with
AccessBase2000 Programming
Programming using a dedicated PC and AccessBase2000 software
Up to 10,000 cardholders grouped in sets
Up to 24 card blocks with up to 1,900 cards each (45,600 total)
Up to 20,000 individually enrolled cards
Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
Up to 20,000 individually enrolled transmitters
Up to 20,000 entry codes for cardholders
Up to 10,000 telephone directory codes for cardholders
10,000 event log entries per unit
Up to 31 access time zones
Up to 6 PBUS devices per unit |
Features:
 Full control of 4 doors; each supporting request to exit and door status
monitoring - Housed in a locked, rugged stainless steel face enclosure
- Articulated, double-locking, stainless steel front panel
- Temperature compensated, back-lit VGA resolution LCD display
- Back-lit keys
- Built-in microphone and speaker
- Built-in RF receiver
- RF frequency: 318 MHz
- Many installation choices: surface, gooseneck, and recessed
(with TR-2000 trim ring)
- Programmable directory code length and talk time; extended
talk time allowed per cardholder
- Direct input for 2 card readers; add AM-CRI's for more
- Local or remote programming using a PC
- Relay auto lock/unlock schedules
 Automatic door relock when door sense input is used - Extensive ESD and lightning protection of all inputs and
outputs
- Cabinet tamper switch included; tamper events are tracked in
the event log
- All data memory is non-volatile FLASH with data retention in
excess of 10 years
- 15.25" W x 18.75" H x 4" D
- Operating Temperature: -22º to
+149º F
- Brochure
- Installation
Instructions
- User
Instructions
- AXNET
Installation and User's Guide
- System
Configuration Selector
- Compatible
MegaCode Transmitters - 318 Mhz, BLOCK CODED ONLY
|
|
