1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Index to Entry Control
Linear AM-RRR Remote Radio ReceiverLinear AM-RRR Remote Radio Receiver

The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception. An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals. The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.


  • Type F connector for connection to local whip antenna (supplied) or optional directional (EXA-2000) and omni-directional (EXA-1000) remote antennas
  • Provides extended range for radio-based access control system
  • Weather-resistant housing for outside or indoor mounting
  • Optional directional remote or omnidirectional remote antennas
  • Integral radio gain control for adjustment of radio range
  • 2-color status LEDs indicates "power on" and "access granted"
  • Radio LED detects transmission
  • Power supplied by access controller
  • Low voltage cable allows remote mounting without signal loss
  • RF frequency: 318 MHz
  • 4.25" W x 6.25" H x 2.5" D (without antenna)
  • Literature
  • Manual