Applications:

• AC or DC Powered Gate Operators/ Actuators
• Slide, Roll, and Swing Gates
• Restricted Access Pedestrian Doors
• Lights
• Parking Lots
• Warehouses
• Garage and Overhead Doors
• Commercial & Residential Applications
• Office Buildings
• Hospitals

Features:

• Proudly manufactured in the USA
• Wired and wireless models available
• Suitable for indoor/ outdoor applications
• Rugged, injection-molded lexan faceplate & housing
• Zinc-coated hardware
• Flexible mounting to walls or gooseneck stands
• 12 user-programmable options
• 1,000 user-programmable codes
• Code range - '0001-9991'
• Programmable flash code
• Programmable flash code (wired 950 model only) - holds gate open/ closed
• Positive/ negative feedback - LED indicators w/ on/off dipswith
• Audible beep indicator with on/off dipswitch
• Keypad activated downlight stays lit for 10 seconds with on/ off dipswitch
• 3-Strikes-You're Out - timed three minute feature with on/ off dipswitch
• Operates in either AC/DC applications
• Ultra-low 20uA current draw (half the typical)
• Non-volatile memory for code retention
• Secure locked enclosure with key

Model 950/ 951 Keypad Programming Manual

*Note - Keypad comes equipped with a multi-code transmitter. In order to operate a device, that device must contain a compatible receiver, which can be found here.

• 7.5" High x 4.75" Wide x 4.5" Deep
• 190.50 mm High x 120.65 mm Wide x 114.30 mm Deep
• UV-Resistant Lexan 403R Housing/ Faceplate
• Indoor/ Outdoor Suitable
• Wall/ Gooseneck Mountable
• Zinc Coated Hardware
• Ship Weight 3 Lbs.

Electrical/ Environmental Specifications:

• 7-24 VAC or VDC
• 20uA Current Draw
• Operating Temperatures: -40°C to 85°C (-40°F to 185°F)
• Storage Temperatures -55° C to 125°C (-67°F to 257°F)

Relay Information:

• .5-60 Second Adjustable Output Time
• Nornally Open or Normally Closed Output

Contact Rating:

• Max. Switching Power - 30W (resistive)/ 62.5VA (resistive)
• Max. Switching Voltage - 220VDC/ 250VAC
• Max. switching Current - 1 Amp
• Max. Continuous Current - 2 Amp

Programming Modes:

• Add Access Codes
• Erase Access Codes
• Add Flash Code
• Erase All Codes
• Add Latch Code
• Set Relay 'On' Time
• Change Master Code
• Reset Master Code