|
| Model 4200 Manual Index
|
|
Multi-Code Model 4200 Wireless Keypad BATTERY REPLACEMENT Replacement battery - 9 volt alkaline battery. The battery can be changed or checked by opening the battery hatch using a flathead screwdriver in the slot provided on the bottom of the keyless entry. A twisting motion of the screwdriver will open the battery hatch and provide access to the battery compartment. (Note: To avoid loss of programmed codes while changing the battery, allow keypad LED's to turn off before removing the old battery, and install the new battery within one minute. Do not depress any key when changing the battery. If the battery is not installed within 1 minute or a key is depressed, the wireless programmable keyless entrymay reset to the factory codes. You must reprogram both radio and access codes if this happens.) |
|
