Hardware Accessories

The Stop Filler Plate is used in installations where only part of the magnet body is on the stop. The plate extends the stop to provide a flat mounting surface for the magnet. Stop Filler Plates are 8" long with a varying thickness to match the stop thickness. Thicknesses offered are: 1/4", 3/8", 1/2" and 5/8". The part number is SFP with a suffix of "CL" for clear anodized aluminum or "BK" for black anodized aluminum.

The Glass Door Bracket permits Magnalock installation on a solid glass door. The bracket is permanently glued to the glass via a special adhesive. The strike plate then screws into the bracket, as glass doors cannot be drilled. The part numbers are: GDB (bracket) and AKG (adhesive kit).

The Aluminum Frame Shim (Spacer) Bracket is for use with aluminum frame glass doors. The bracket spaces the magnet body down 1/2" to clear the blade stop and provides alternate mounting hardware for the strike plate as with the magnet body spaced down, the standard sex bolt can interfere with the glass. The part number is ASB-62 with a finish suffix, or "BK" for black anodized aluminum.

The Header Extention Bracket is used to extend a narrow header to permit mounting of the Magnalock. The bracket is used to extend the header 3". The part number is HEB-3 with a finish suffix of "CL" for clear anodized aluminum or "BK" for black anaodized aluminum. (includes fasteners)

 
The Concrete/Wood Frame Bracket is used on concrete filled or wood door frames. On concrete frames, the bracket anchors to the frame via sheet metal screws and the magnet mounts to the bracket via machine screws. The bracket includes a central splice area and avoids the problem of drilling a wireway through the concrete. On wood frames, 4" wood screws are employed to penetrate deeply into the header. The part number is CWB-62 with a finish suffix of "CL" for clear anodized aluminum or "BK" for black anodized aluminum. (includes fasteners)

The Universal Header Bracket is used to extend a narrow header (often found on alumimum frame glass doors) to permit mounting of the Magnalock. The bracket is positioned either to extend 1" or 1-1/2" and also serves to conceal the hookup cable within its hollow interior. The part number is UHB with a finish suffix of "CL" for clear anodized aluminum or "BK" for black anaodized aluminum. (includes fasteners)

Dress Covers are available for the M62 series Magnalock. They install in seconds using structural foam adhesive and perform three function: The cover improves the appearance of the installation by concealing the strike and also improves tamper resistance. Finally, the covers are available in four finishes allowing easy alteration of the Magnalock finish to suit architectural considerations. The part number is DC-62 with a suffix of "CL" for clear anodized aluminum, "BK" for black anodized aluminum, "BP" for polished brass and "SP" for polished stainless.

Z Brackets are available for the M62 series "F" version Magnalock and allow mounting on an inswinging door. The bracket includes fasteners and a cover which gives the installation an attractive finished appearance. The assemble is available in three finishes. The part number is Z-62 with a suffix of "SS" for stainless steel, "CL" for anodized aluminum and "BK" for black anodized aluminum.

Double Swing Gate

Single Swing Gate

Sliding Gate

Typical Door Applications
(click to enlarge images)

Outswinging Door

Inswinging Door

Sample Applications

Inswinging Door, Model M64F,
Z Bracket Mount For
Strike Plate, With Cover

Outswinging Door, Model M64,
Horizontal Mount Using Universal
Header Bracket, With Cover

Outswinging Door, Model M64G,
Vertical Mount, Steel Door

Outswinging Door, Model M64F,
Vertical Mount, Glass Door
With Aluminum Frame

Hardware Accessories

Prices include shipping anywhere in continental U.S.A