1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Return

Securitron Power Sources

PRICES

Securitron Power Sources
Ready-To-Install Power Supplies and Power Accessories

SECURITRON POWER SOURCES

OVERVIEW
     Securitron manufactures a variety of outstanding products designed to supply and monitor 12 or 24 Volts for the operation of security and safety equipment. The BPS Series DC Power Supplies include battery charging capability with capacities from one to 15 Amps. The BACS Series provides high capacity 12 and 24 volts AC power. The model PSM Power Supply Monitor functions as an alarm system for your BPS series supply and our plug-in DC supplies and potted bridge rectifier fit into simpler applications.
     All models are UL listed and incorporate integral battery charging capability which keeps the sealed lead acid gel/cell at full charge for instantaneous stand-by power in case of line voltage failure. All models in the series are Class 2 rated by UL which means that output wiring need not be run in conduit. The BPS-12-1 and BPS-24-1 are one amp units that incorporate a fused AC input and a regulated DC output. A 2.5 Amp current limiting automatic breaker protects the stand-by batteries from driving into a short circuit. Plus, in the event of a DC short, the supply’s regulator will go into thermal cut-off, switching off the output. The power supply enclosure is sized large enough to include at least two optional four amp-hour batteries and the unit can charge up to a 20 AH pack (batteries mounted externally).

BPS Series Power Supply

CCS Board

     The multi-featured CCS board allows easy hook-up and control for the BPS series 2amp or greater power supplies. The board includes fuse protected AC input, fire alarm interface, slide switches for output disable/reset, LED indicators, automatic breakers for protecting DC outputs and individual screw terminals for positive and negative Class 2 outputs.

BPS Series Power Supply shown with optional Battery Pack

BPS SERIES: CLASS 2 WITH OR WITHOUT BATTERIES
    
All models are UL listed and incorporate integral battery charging capability which keeps the sealed lead acid gel/cell at full charge for instantaneous stand-by power in case of line voltage failure. All models in the series are Class 2 rated by UL which means that output wiring need not be run in a conduit. The BPS-12-1 and BPS-24-1 are one amp units that incorporate a fused AC input and a regulated DC output. A 2.5 Amp current limiting automatic breaker protects the stand-by batteries from driving into a short circuit. Plus, in the event of a DC short, the supply's regulator will go into thermal cut-off, switching off the output. The power supply enclosure is sized large enough to include at least two optional four amp-hour batteries and the unit can charge up to a 20 AH pack (batteries mounted externally).

BPS SERIES WITH CCS CONTROL MODULE
     For larger applications and installations where multiple devices are being powered, Securitron offers the higher-amperage BPS Power Supply Series with integral CCS-4 or CCS-8 Power Control Module. The CCS board provides a fused line voltage input and four or eight DC outputs on separate UL Class 2 Listed current limited automatic circuit breakers. Each circuit can be individually turned on and off via a slide switch and the powered status of each is shown by an LED. There is no need for extra AC wiring of additional dedicated supplies in a multiple zone device installation and in the event of a DC short, the problem is confined to the zone in difficulty. The BPS continues to power all other stations, uninterrupted by the faulty component. An LED indicator light on the front cover illuminates when the power supply module is in operation and the unit will charge up to 20 AH battery packs (for larger packs, consult the factory).

Multiple Door Electric Lock Installations      The design of Securitron's larger power supplies employs multiple outputs. This allows the optimum configuration for multiple door, electric lock installations. A single power supply is mounted next to the fire alarm system which will release all the doors in the event of a fire. Other Securitron products that work with the complete system such as the Power Supply Monitor or Lock Control Panel are also mounted next to the power supply. Then, low voltage, inexpensive DC wiring goes to each door. This saves not only the expense of multiple supplies but also the expense of multiple AC drops at each door.

ADDING ADDITIONAL CLASS 2 OUTPUTS AND FIRE ALARM INTERFACE
    While BPS series supplies are delivered with four or eight outputs depending on the model, the CCB-8 "slave" board may be optionally ordered to add eight additional Class 2 outputs. The more boards you add, the more outputs become available. Also, for added safety, the CCS-8 module has emergency release terminals. These can be broken by an external switch opening such as a relay controlled by the fire alarm system. This will automatically release all the devices being driven by the supply.

THE UL LISTED BACS SERIES: HIGH CAPACITY AND MULTI-ZONE
    
Primarily intended for powering CCTV cameras, Securitron's BACS-12-20 supplies 20 Amps of 12 VAC power and the model BACS-24-10 supplies 10 Amps of 24VAC power. The BACS series employs the same multiple zone control concept as the BPS series as it includes nearly identical control boards (part number CCS-8A), which provide eight automatically breakered outputs with individual control switches and LED's. As with the BPS series, additional "slave" boards may be ordered to add eight extra zones (part number CCB-8A).

MORE INFORMATION:
Securitron BPS Series Specifications
Securitron Technical Data

PRICES/ORDERING:
Securitron Power Sources/Prices
Securitron Power Monitors/Prices
Securitron Transformers/Add-On Control Boards/Bridge Rectifier/Batteries/Prices