|
|
ST-1050 Stanley
Single Button Transmitter
- Activates one Stanley receiver
- Test/operate LED
- Visor clip included
- Power: 9V battery (included)
- Frequency: 310 MHz
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875 inches
- Price includes 2nd Day Air shipping
- Instructions
- $32.74
- Add to
Cart | View Cart
|
|
|
ST-1094 Stanley Two
Button Transmitter
- 2 buttons for controlling 2 separate receivers as in side by
side garage doors or door and gate combina
- Test/operate LED
- Visor clip included
- Power: 9V battery (included)
- Frequency: 310 MHz
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875 inches
- Price includes 2nd Day Air shipping
- Instructions
- $44.99
- Add to
Cart | View Cart
|
|
|
DIGI-5032-310
Stanley Compatible Three Button Transmitter
- 3 buttons for controlling 3 separate receivers
- Test/operate LED
- Visor clip included
- Power: 9V battery (included)
- Frequency: 310 MHz
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875 inches
- Price includes 2nd Day Air shipping
- Instructions
- $38.48
Add
to Cart | View Cart
|
|
 |
ST-1097 Stanley
Compatible Four Button Transmitter
- 4 buttons for controlling 4 separate receivers310 MHz
- Test/operate LED
- Visor clip included
- Power: 9V battery (included)
- Frequency: 310 MHz
- Codes: 1,024 (set by dip switches)
- 100% Stanley compatible
- Price includes 2nd Day Air shipping
- Instructions
- $31.05
Add to
Cart | View Cart
|
|
|
ST-KPAD Stanley
Wireless Keypad
- Compatible with Stanley 10 dip-switch receivers, not
SecureCode
- Convenient keyless entry
- Backlit keypad is weather proof
- Test/operate LED
- Easy two screw installation
- Operates using 9 volt battery
- Frequency 310 MHz
- Never lose your transmitter
- Price includes regular ground shipping
- $51.98
- Add to
Cart | View Cart
- This model operates much the same as the Multi-Code version,
click here for the Online Intruction
Manual
|
|
|
MC-302850
2-Channel 12V-24V Stanley Compatible Gate Receiver
- Dual frequency - Multi-Code or Stanley compatible; jumper
selectable
- 12-24 Volts AC or DC
- Auto voltage sensing - no jumpers to set
- Two relay
- Supplied with whip antenna, three feet of coaxial cable and
bulkhead connector
- Power: 12-30 VAC or 10.5-30 VDC; 16 mA nominal, 50 mA maximum
while relay is triggered
- Frequency: 300 MHz and 310 MHz
- Dimensions: 5.25 x 3.625 x 1.5 inches
- Instructions
- $90.45
- Add to
Cart | View Cart
|
|
|
DIGI-5112-310
Commercial Receiver
- 100% Stanley compatible Gate Operator Receiver
- Perfect for use in a gate operator housing
- Comes with whip-style antenna and instructions
- "F" type connector for attaching a coaxial antenna
kit
- 12/24 AC or DC
- Instructions
- $54.68
- Add
to Cart | View Cart
|
|
|
ST-29524RB Stanley
Safety Beam Replacement Sensors
- Super-heavy duty unit which acts as a safety device.
- When the beam of light is crossed by a car, pet or moving
object it send a signal to the opener to reverse.
- Essential for operating in a safe manner!
- Includes photo eyes only
- Instructions
- $57.38
- Add to
Cart | View Cart
|
|
Stanley
Secure-Code Radio Controls
NOTE: The item below is not compatible with
the standard digital remotes or receivers. It uses Stanley's version of a rolling
code rather than dipswitches. |
|
|
ST-3703352 Stanley
SECURE CODE 3 Button Keychain Transmitter
- Compatible with all Stanley Secure Code receivers
- Not to be used with dip switch receivers above
- One touch programming, no dip switches to set
- Three button remote can operate 3 different receivers
- Battery included
- Key ring included
- Dimensions: 1.375 x 2.125 x .875
- Instructions
- $45.99
- Add to
Cart | View Cart
|
|
We carry the full line of Stanley garage door
products, including garage door openers, radio transmitters, 'clickers', receivers,
wireless keypads, etc. We also carry products by Multi-Code, Lift-Master, GTO, etc.
