More Electric LocksAutomatic Gate Lock - FM142
for "Push-To-Open" Applications,
Locking Gate In Closed Position
(can also be used to lock gates in open position)
This lock is used for gates
that "push-to-open". Lock is mounted on the inside of the gate, the same side
the operators are mounted on. The gate opens outward, toward the road. When using on
double drive gates, sequencing of the gate will stabilize one half of the gate for the
lock to engage when fully closed. Brackets may be required to mount the receiver in the
correct position to accept the lock's latching mechanism when mounting to a post. (usually
a "Z" shaped bracket). Mounting brackets are not included. Hardware is readily available at any hardware store.
Lock can also be used to lock the gate in the open position, primarily to
take the stress off the gate operator in high wind situations. Heavy solid gates may
require this lock.
The GTO control board is ready to accept this add-on accessory.
Simply mount the lock, run the provided wire across the gate to the control box and plug
This lock is an older version of the FM142 found here. This item
is slightly tarnished, but it can be easily painted to look like new. Available at the
discounted price of $125.00.
All content copyright Hoover
Fence Co. and Hoover Enterprises June 1999. P.O. Box 563, Newton Falls, OH 44444 Phone: