1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Hardware Index: Ornamental | D&D Catalog
 Top Gate Mounted - Hydraulic Gate Closer for Center-Hinge Mounted Gates. 

SureClose« Easy Hydraulic Gate Closer Features - Model # SCE 108SF S

(Click Images Below to Enlarge)

The SureClose« EASY Hydraulic Gate Closer is a compact, heavy duty add-on gate closer that is designed for both residential and commercial pedestrian gates. The closer will work with most center-hinge pivot point hinges that have either a flat top or bottom rail available for mounting. The sleek and styling closer installs without specialty tools and is adjustable to accommodate hinge allowances of 2" to 4". To make sure this closer will work for you, your installation must meet the following requirements:

  • Hinge pivot point MUST fall within range (Minimum 2" to Maximum of 4").
  • Gate must be completely flat where it is to mount - no arch, pickets, or caps can be in the way.
  • Closer may be able to be installed under the bottom of a gate if certain conditions are met (See installation manual).
  • WILL NOT WORK on gates without center pivoting hinges.

SureClose« Easy Hydraulic Gate Closer Features:

  • Small and sleek design.
  • Smooth and quite operation.
  • Easy to install design without need for specialized tools.
  • Self-closes gates up to 180 lbs.
  • Maintenance free design - never need to add fluid.
  • Highly corrosion resistant anodized finish.
  • Tested to 500,000 cycles!
  • ADA compliant.
  • Installation Instructions | 2-Year Limited Warranty
SureCloser« EASY Hydraulic Gate Closer Gate Function DiagramSureClose« Easy Hydraulic Gate Closer Installation RequirementsSureClose« Easy Hydraulic Gate Closer SpecificationsSureClose« Easy Hydraulic Gate Closer Capacities ChartSureClose« EASY Hydraulic Gate Closer Direction of Swing Diagram
Code* Type Description Self-
Size Min.
Price View Cart
72108423 SCE 108SF S SureClose Easy
Top Mount Gate Closer
90║ 90║ Yes Yes 2"-4"
(50-100 mm)
(50 mm)
2.50 $ Add to Cart
*All EASY closers include fasteners, gate, and post mounting brackets.

**Yes (SF) = Gate will not hold open at 90║ (OK for safety gates). Do NOT use a hinge with a 90║ hold-open feature (-) for pool/child safety gates. IMAGE
Hinges must be at least 36" (900 mm) apart so that they cannot be used as footholds by toddlers. IMPORTANT: For maximum gate weights, see weight chart above.

CAUTION: A gate stop must be installed when using SF models. Gate must not be allowed to open past 90║. Doing so voids warranty.