Hoover Fence - Vinyl Fence, Aluminum Fence, Ornamental Gates And Gate Operators

  Home

Exit Wands
Electronics for Automated Gates
Automated Gate Operators

Entry Devices

Exit Devices

Safety Devices

Security Devices

Miscellaneous

 

EMX CarSense 101 Exit Wand

 EMX CarSense 101 Exit Wand - Outdoor buried vehicle motion detector with sensing probe and 100' lead. Available in 12 VDC, 24 VDC and 24 VAC versions. Housed in a small relay type housing so it is easy to integrate with security control boards, gate and door operators. All the controls and indicators mounted on the front panel of the unit providing for easy access and operation. Low current consumption makes it an excellent choice for solar power applications. This unit works best with AC gate operators such as our OSCO brand or the 24 VDC Elite operators, which use 24 VDC accessories. Great free exit device.
EMX Carsense 202 Exit Wand EMX Carsense 202 Exit Wand - Automobile sensor is buried to avoid detection. Free exit device used to automatically open the gate when exiting property without having to use a transmitter or keypad. Can be located up to 100' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 mph. Can be used in pairs for automatic opening in and out. Available in 3 wire and 5 wire versions. Both are 12 VDC only. Recommended for our DC gate operators including the GTO/PRO and Mighty Mule systems. Hooks right up to the control board.
GTO F140 Exit Wand GTO Exit Wands - Manufactured by GTO, these exit wands are made to work with all GTO and Mighty Mule swing or slide gate operators. They may also be used with other brand operators. Easy installation, requires no other power supply when using the GTO control box. Powered by the 12VDC battery used to power the operator. Can be used in pairs for easy exit or entry. Models available with 100', 150' and 250' direct burial wires with a maximum sensitivity range of 12 foot. Recommended for our DC gate operators including the Elite, GTO/PRO and Mighty Mule systems.
GTO R4500 Vehicle Exit Sensor GTO R4500 Wireless Vehicle Exit Sensor - Manufactured by GTO, the R4500 Exit Sensor is made to work with all GTO and Mighty Mule swing or slide gate operators. It may also be used with other brand operators. Completely wireless, easy installation, requires no trenching to the operator. Powered by (2) AA batteries. Excellent free exit device requiring no "hands on" operation. Includes two channel receiver with 100 foot range between transmitter and receiver. Recommended for all DC gate operator systems. Great for solar applications as well.