Electronics for Automated Gates
| Automated Gate Operators
Entry Devices
Exit Devices
Safety Devices
Security Devices
Miscellaneous
|
|
|
|
|
|
|
|
EMX IRB-325 Infrared Photoeye - The IRB-325
photocell is used as an external entrapment protection device type
B1 non-contact sensor for use with automatic gate operators. The
IRB-325 complies with UL325 standards. Operates at a distance from
6' to 65'. When infrared beam is broken the IRB-325 produces a
detection signal to stop or reverse a door/gate. Can be used in sets
to protect all areas of entrapment. 12V/24V AC/DC 150mA. Measures
5.03"x 3.06"x 3.02". |
|
 |
EMX IRB-4X-HB Infrared
Photoeye - The IRB-4X-HB photocell is used as a safety, reversing, or opening
device. Used with garage doors, rolling doors, parking barriers and other automatic
operators. Protects by sensing person or vehicle in danger zones. Operates at a distance
up to 75'. Can be used in sets to protect all areas of entrapment. 12V/24V AC/DC +25%,
30-60mA. Measures 3.7"x 2.56"x 2.24". |
|
 |
EMX PC-3 Infrared
Photoeye - Used as safety device. Protects by sensing person or vehicle in
danger zones. Operates at a distance up to 30'. When infrared beam is broken the PC-3
produces a detection signal to stop or reverse a door. Used primarily with garage doors
and rolling doors. 12V/24V AC/DC. Measures 4"x 2"x 1.5". |
|
 |
EMX P44 Infrared Photoeye
- Used as safety device. Protects by sensing person or vehicle in danger zones.
Operates at a distance up to 49'. When infrared beam is broken the P44 produces a
detection signal to stop or reverse a door/gate. Can be used in sets to protect all areas
of entrapment. 12V/24V AC/DC. Requires power to one side only, other side is battery
powered. Convenient for situations where power is only available on one side. Measures
2.8"x 3.1"x 1.6". |
|
 |
EMX NIR
Retro-Reflective Photoeye - Used as a reversing sensor for commercial
overhead doors, gates, and parking barriers. Protects by sensing person or vehicle in
danger zones. Operates at a distance up to 30'. When infrared beam is broken the NIR
produces a detection signal to stop or reverse a door/gate. Can be used in sets to protect
all areas of entrapment. 12V/24V AC/DC to 240V AC. Measures 2.5"x 1.5"x
.75". Requires power to one side only, reflector requires no power. |
|
 |
EMX NIR PLUS
Retro-Reflective Photoeye - Used as a reversing sensor for commercial
overhead doors, gates, and parking barriers. The NIR PLUS is similar to the
NIR photoeye above with added benefits such as an extended range of 45', providing better
performance in rain and snow. It also features a lower current draw of 28mA, making it an
excellent choice for solar and low voltage applications. Can be used in sets to protect
all areas of entrapment. 12V/24V AC/DC to 230V AC. Measures 2"x 2"x .70".
Requires power to one side only, reflector requires no power. |
|
 |
GTO R4222 Photo Beam - Used
as a safety device. Protects by sensing person or vehicle in danger zones. Operate at a
distance up to 295'. When infrared beam is broken the R4222 produces a detection signal to
stop or reverse a gate. Used primarily with gate operators. Can be used in sets to protect
all areas of entrapment. DC13.8~24V / AC11~18V, 40mA max. Measures 6.75"x 3.25"x
3". |
 |
Omron E3K Infrared Photoeye -The Omron E3K photoeye
uses the retroreflective detection method to protect an automatic
gate operator from coming into contact with foreign objects. The
Omron E3K is a preferred photobeam sensor as wires do not need run
to both sides of the driveway. Wires from the door or gate operator
only need run to sensor side of drive. The E3K complies with UL325 standards. Operates at a distance
up to 40'. When
infrared beam is broken the E3K produces a detection signal to stop or reverse a
door/gate. Can be used in sets to protect all areas of entrapment.
42 - 240 VAC, 50/60
Hz, 24 - 240 VDC.
Measures 7.4" High x 3.5" Wide x 2.5" Deep. |
|
|
