Construction Samples

5' High / 12' Opening
Cantilever Gate

Customer Photos of Gate and Electronics
Photos courtesy of Cheryl K. of Columbiana, Oh., 2003

The pictures below are from a customer here in Ohio. The project consisted of chain link fence, cantilever gates and entry control electronics, all installed by the customer with the occasional assistance of an electrician. Not all of our customers are capable of installing all the items involved with a project of this size. Our compliments to the company and it's employees on a job well done! Thanks for the photos, Hoover Fence Company. (Click here for material list)

Photos of Unloading Large Gates
6'H x 25'W Opening Cantilever Gate Kit

Pictured below are a few of our larger gate kits made. These gates are approximately 6' high x 38' wide including the counterbalance and designed to fit a 25' wide opening. These gates will be mounted on two 6-5/8" O.D. posts with nylon rollers. Large trucks, equipment, and manpower are required for unloading these gates. Each weigh well over 500 pounds.

Photos of Slide Gates
4'H x 15'W Opening Cantilever Gate Kit

Pictured below is one of our smaller gate kits made. This gate is approximately 4' high x 21' wide including the counterbalance and designed to fit a 15' wide opening. These gates will be mounted on two 3" O.D. posts with steel rollers. Large trucks, equipment, and manpower are required for unloading these gates.

Photos of Cantilever Gate Installation The pictures below are from a customer's project. Job consisted of 6' high fence with a cantilever gate at the entrance. Below are pictures of various stages of the installation of the cantilever gates. All the materials were provided by Hoover Fence Company.

Cantilever Gates Photos  1 | 2