| Communication: |
Full duplex hands free |
| Input Power: |
24 VAC, 60 Hz - 20 VA transformer provided |
| Current Draw: |
250 ma. |
| Operating Temperature: |
-10 degrees F to 145 degrees F (-24 degrees C to 62 degrees C) |
| Time Clock: |
Internal, 7 day programmable |
| Double/Standard Ring: |
Call from entry system (2 short rings) - Incoming phone call (standard
long ring) |
| Programming: |
Program from system keypad, from house phone, remotely from outside |
Intercom Mode:
|
System can be programmed for intercom mode and connected to an unused C.O.
port on a PBX or KSU system |
Bypass Switch:
|
System bypass switch allows house phones to be switched directly to C.O.
linein case of power outage or system malfunction |
| Output: |
Two dry contact relays |
| Preprogrammed Numbers: |
Up to 3 phone numbers |
Relay Functions:
(Touch Tone Phones Only) |
Momentary contact, latch relay, un-latch relay, latch for one hour
|
Entry Code Functions:
|
14 each relay - momentary contact
1 each relay - Flash codes
5 each relay - latch relay
5 each relay - time zone restriction |
| FCC Registration: |
DUF6VT-12874-OT-0 |
| DOC Registration: |
1736 4507 A |
| Ringer Equivalence: |
0.0 A. |
| Jack Type: |
RJ11 C or W |
| Surface Mount Dimensions: |
6 1/8" high, 10" wide, 5 1/4" deep @ top, 3" deep @
bottom |
| Flush Mount Dimensions: |
7 1/4" high, 11" wide (Face plate). 6 1/8" high,
10" wide, 3" deep (box). |
| Flush Mount Box Dimensions: |
6 1/2" high, 10 1/4" wide, 3 1/8" deep (Rough in box
requirements) |
| Decorative Stainless Steel and 24K Gold Plating: |
Models are available with stainless steel or 24K gold plated face plates
and housings |
| Shipping Weight: |
Approximately 14 pounds |
| Warranty: |
Two year factory to dealer limited warranty |
