|
||
|
Product Code: FM148 (347IH) and FM149 (348IH) GTO Push To Open Adapter Allows conversion of the standard pull to open application to a push to open on GTO swing gate operators. Pull to open means the gate will swing towards the side the arm is attached. That normally is on the inside of the gate, although operators can be installed on either side that allows the gate to swing clearly. Push to open is the opposite. The gate would swing in the direction away from the side that the operator is mounted. One bracket is required for each actuator arm. Two are required for a double swing gate that has two actuator arms. These brackets replace the standard post pivot brackets that come with the operators. Not for PRO4000, which can be configured for pull to open or push to open without additional hardware. FM148 (347IH)
FM148 (also called 347IH) push to open
bracket for PRO-SW3000, PRO-SW2500, PRO-SW2000, PRO-SW1500, Mighty Mule 500, and Mighty
Mule 350.
FM149 (348IH)
FM149 (also called 348IH) push to open
bracket for PRO-SW1000, PRO-SW1800, and MM700. |
