Low Voltage Slide Gate Operator designed for residential, farm and light commercial use. Read our frequently asked questions page for more information. If you still need help, e-mail sales@hooverfence.com

• 12 volt system
• No electrician needed for installation
• Gate will work during electrical power outage
• Quick and easy installation, with user friendly, photographed instructions
• Optional concrete mounting pad available here
• Solar Panel Charger available for remote locations (requires large battery pack for solar applications, see FP295 in accessories)
• Can operate 50 to 140 gate cycles during peak hours of operation, depending on size and weight of gate (see cycle chart link below)
• Can handle single gates up to 20' wide opening - 30' overall width
• Receiver unit with antenna and 20' cable can be placed in best location for reception of signal
• Can be operated by remote transmitter, digital keypad, push button or combination
• Programmable control box
• Gates up to 1000 pounds
• Two-year limited warranty applies to replacing parts from GTO, Inc.
• 30 day satisfaction guarantee from Hoover Fence

Includes:

• Operator - class 2
• AC transformer
• 12 volt battery
• Control box/control board
• Receiver with 20 ft. cable
• Entry transmitter
• 32' chain
• Mounting hardware
• Installation/safety manual
• Caution signs.
• Warning Beeper
• Adjustable obstacle-reversing safety feature

Cycle Chart for use with transformer provided

SL-2000 Installation Manual

GTO Slide Gate Operator with Brake
The brake model slide gate operator has an internal braking system. It is useful if security or vandalism is an issue. The standard SL-2000 does not have a brake in it. There is no electric lock option available for this operator. The operator will hold the gate shut and one person can not force it open, however two people or a force equal or greater may be able to force it open. This would either break the chain, strip the internal gears or both. You may prevent this from happening by ordering the SL-2000B. The SL-2000B has an internal brake installed. This brake locks the gears down so that they can not be forced open. If a strong force were to try to force it open, the gears would not be stripped. Someone would have to cut and remove the chain in order to force the gate open. Simply put, it is a safety device to prevent operator damage and to further secure the gate. It is more expensive than the standard SL-2000 as you have noticed, however it may be a cheap insurance policy preventing damage.