Power Cables For GTO Gate Operators

C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm

Home

Gate Operator Index

GTO Gate Operators
(All 12V DC except where noted)

Swing Gates

Slide Gates

SL2000B
GP-SL050 (AC)

More Information

Accessories

Low Voltage Acc's

Replacement Parts

GTO Replacement Parts

Power Cables For GTO and Mighty Mule Gate Operators

These are the cables that connect the operator actuator arm to the control box. They are supplied with a new operator and slave. These are replacement cables for the ones the dog chewed up or you may want to locate the control box farther away.

(These power cables are for our current GTO/PRO and Mighty Mule operators, power cables for discontinued GTO and Mighty Mule operators can be found below )

Product Code: PCK30406

6' Power Cable Kit w/Strain Relief - PRO3000 and PRO4000

This cable is standard with the PRO3000 and PRO4000 operators. Strain relief plug included.

$ each Add To Cart | View Cart

Product Code: PCK3240

40' Power Cable Kit w/Strain Relief - PRO3200

This cable is standard with the PRO3200. Strain relief plug included.

$ each Add To Cart | View Cart

Product Code: PCK4250

50' Power Cable Kit w/Strain Relief - PRO4200

This cable is standard with the PRO4200. Strain relief plug included.

$ each Add To Cart | View Cart

Product Code: PCK506

6' Power Cable Kit w/Strain Relief - PRO2500 and MM500

This cable is standard with the PRO2500 and the Mighty Mule 500. Strain relief plug included.

$ each Add To Cart | View Cart

Product Code: PCK5240

40' Power Cable Kit w/Strain Relief - PRO2000XL, PRO2550 and MM502

This cable is standard with the PRO2000XL, PRO2550 and the Mighty Mule 502 slave operators. Strain relief plug included.

$ each Add To Cart | View Cart

Product Code: R4074

Dual Cable Kit Power Harness - PRO1500

This cable supplies the power to a second operator when using a dual operator system for double gates.

No longer available individually.

Product Code: R4075

Dual Cable Kit Connection Harness - PRO1500

This cable supplies communication for a second operator when using a dual operator system for double gates.

No longer available individually.

Product Code: R4076

Dual Connection Kit - PRO1500
(contains R4074 and R4075)

This cable kit supplies both power and communication for a second operator when using a dual operator system for double gates.

$ each Add To Cart | View Cart

Power Cables For Discontinued GTO and Mighty Mule Gate Operators
Choose the proper power cable by model number and whether or not you need one with plugs at both ends or only one plugged end. Prior to March of 2000 UL-325 changes, the cables had plugs at both ends. After the new UL-325 changes took effect, the cables had a plug only at one end. You can always cut a plug off, if you don't need it, but we carry all of them.

Product Code: AW201

4.5' Power Cable - for PRO1000 and PRO 1800

Single Plug used for PRO1000 and PRO1800 after UL325 changes of March 2000. Also used with the Mighty Mule FM700/702. If your operator is newer than March of 2000 , use this cable. Simply check to see if it has a plug only at one end.

This is the cable that is supplied with the operator when new. It is used to connect the primary actuator arm to the control box.

No longer available.

Product Code: AW202

25' Power Cable - for PRO1000/1200

Has only one plug used for PRO1000 after UL325 changes of March 2000. If your operator is newer than March of 2000 , use this cable. Simply check to see if it has a plug only at one end. This is the cable that is supplied with the slave operator. It is used to connect the primary actuator arm to the control box. It can also be used to locate the control box further from the actuator arm on a new installation. We do not substitute cables in new operators.

No longer available.

Product Code: AW203

4.5' Power Cable - PRO1000 and PRO1800

This cable is standard with the PRO1000 and PRO1800 prior to March 2000 UL-325 changes. It has a plug at both ends.

No longer available.

Product Code: AW204

25' Power Cable - PRO1000/1200

This cable is standard with the PRO1200 slave operator prior to March 2000 UL-325 changes. It has a plug at both ends.

No longer available.

Product Code: AW209

6' Power Cable - PRO2000 only

This cable is standard with the PRO2000 after UL325 changes of March 2000. It has a plug at one end only.

No longer available.

Product Code: AW210

50' Power Cable - PRO2200 only

This cable is standard with the PRO2200 slave operator after UL325 changes of March 2000. It has a plug at one end only.

No longer available.

Product Code: AW240

40' Power Cable - PRO1000/1200 only

This cable is used to replace standard cables on the PRO1000/1200 and Mighty Mule 700/702 operators made after March 2000 UL-325 changes. It has a plug at one end. Used to locate the control box further away or to provide a longer cable for snaking through conduit under the driveway.

No longer available.

Product Code: AC109

40' Power Cable - PRO1000/1200 only

This cable is used to replace standard cables on the PRO1000 and PRO1200 operators made prior to March 2000 UL-325 changes. It has a plug at both ends. Used to locate the control box further away or to provide a longer cable for snaking through conduit under the driveway.

No longer available.

Product Code: AC202

60' Power Cable - Standard with SL-1200 (FMS-1200) slave

This cable is used to replace standard cables on the SL-1200 (FMS-1200) slide slave operator.

No longer available.