|
C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm
|
Product Code: PRO-SW2000XL
 GTO/PRO Swing Gate Operator |

PRO-SW2000XL for Single Gate Shown
|
Low Voltage Swing Gate Operator designed for tubular steel,
vinyl, wood, or ornamental gates for residential, farm and light commercial use. The
PRO-SW2000XL is for single swing gates. The PRO-SW2002XL is for a double swing gate
(below). Read our frequently
asked questions page for more information. If you still need help, e-mail sales@hooverfence.com.
- 12 volt system, no electrician needed for
installation
- Gate will work during electrical power
outage
- Quick and easy installation, with user
friendly instructions
- Solar Panel Charger available for remote
locations
- Will operate a gate up to 12' long and weighing up to 400
lbs. each leaf.
- Can operate 105 to 185 gate cycles during
peak hours of operation, depending on gate size and weight (see cycle chart link below)
- Control box can be mounted in protected area
away from receiver (may require longer cables)
- Control box measures 18-1/2" high x 14-1/4" wide x 7-1/2" deep
- Receiver unit with antenna and 10' cable can
be placed in best location for reception of signal
- Can be operated by remote transmitter,
digital keypad, push button or combination
- Full systems capable "add on ready" heavy-duty
control board includes adjustable obstruction sensing, gate sequencing and auto close
settings (0-120 seconds).
- High cycle capability with true soft start and stop
operation
- Full access ready package includes battery, radio receiver,
entry transmitter, AC transformer, and all necessary mounting hardware for a standard
installation.
- Can operate as 'push to open' or 'pull to
open' (specify when ordering - extra hardware required for push to open)
- UL rated for Class I, II, III & IV. System certified to
be in compliance with UL 325, 5th edition.
- Two-year limited warranty applies to
replacing parts from GTO, Inc.
- 30 day satisfaction guarantee from Hoover
Fence
Technical Specifications:
- Powered by a reliable 12 Volt (120 Watt) DC motor, 16:1
planetary gear drive system.
- Temperature rating of motor: -5ºF (-21ºC) to +160ºF
(+71ºC)
- Opening time is from 15 seconds.
- Range of arm stroke is up to 11" (0.3 m). Operator
length with arm fully retracted is 33.25" (0.85 m), mounting point to mounting point.
|
- The PRO-SW2000XL system is powered by one 12 volt DC/7.0 amp
hour, sealed, rechargeable battery (included).
- Optional second battery fits in control box, used for solar
applications or high traffic applications, if needed
- Battery charge maintained by a 120V AC/60 Htz input and 18V
AC at 40 VA output, transformer rectified to 14 V DC through the GTO Control Board.
NOTE: Transformer should never be connected directly to any battery.
- Optional GTO Solar Panel Charger: float voltage 14.5 V DC
output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents
battery discharge.
|
- The GTO control board can be programmed for pull-to-open or
push-to-open.
- Adjustable auto close, obstruction sensitivity and dual gate
sequencing.
- Slow Start/Stop for added cycles and system life.
- Auto-memorization of digital transmitter code.
- Charging regulated circuit on control board. "Sleep
draw" is 15 mA; "active draw" is 2 to 5 amps.
- GTO remote-mounted RF receiver tuned at 318 MHz.
|
Includes:
- Operator arm
- AC transformer
- 12 volt battery
- Control box/control board
- Receiver with 10 ft. cable
- Entry transmitter
- 6 ft. power cable
- Mounting hardware
- Installation/safety manual
- Caution signs.
- Warning Beeper
- Adjustable obstacle-reversing safety feature
|

GTO/PRO SW2000XL
|
Product
Code: PRO-SW2002XL

GTO/PRO Double Swing Gate Operator
The GTO PRO-SW2002XL system will operate a double swing gate
up to 24' wide (12' each leaf). Burying the power cable directly across the driveway is
fine. It can be snaked through conduit also. Cable is 1/4 inch diameter with a 1 inch plug
on one end only. Can operate 53
to 93 gate cycles during peak hours of operation, depending on gate size and weight.
Includes:
- Master Operator arm with 6 ft. power cable
- Slave Operator arm with 32 ft. power cable
- AC transformer
- 12 volt battery
- Control box/control board
- Receiver with 10 ft. cable
- Entry transmitter
- Mounting hardware
- Installation/safety manual
- Caution signs.
- Warning Beeper
- Adjustable obstacle-reversing safety feature
|

GTO/PRO SW2002XL
|
|