|
C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm
|
Product Code: PRO-SW3000XL-LCB
 GTO/PRO
Swing Gate Operator |
PRO3000XL-LCB and PRO3200XL
for Double Gates Shown
|
Low Voltage Swing Gate Operator designed for tubular steel,
vinyl, wood, or ornamental gates. The enhanced motor design provides an extended cycle
life, ideal for single family estates, housing complexes of up to twenty multi-family
units or equivalent commercial applications. The PRO3000XL-LCB is for single swing gates.
Add the slave unit PRO3200XL for a double swing gate (below). Features GTO's true soft
start and stop operation and a fast open/close speed as low as 15 seconds. The 3000XL-LCB
is the same operator as the 3000XL,
only it comes with a larger metal control box that will hold a common automotive or marine
battery for maximum reserve power (battery not included). The large control box provides
ample room for optional access and safety device controls. For general operator
information, read our frequently
asked questions page. If you still need help, e-mail sales@hooverfence.com.
 12 volt system, no electrician needed for installation- Gate will work during electrical power
outage
- Quick and easy installation, with user
friendly instructions
- Solar Panel Charger available for remote
locations
- Will operate a gate up to 16' wide and weighing up to 650
lbs. each leaf (minimum size gate 5' wide each leaf).
- High cycle capability with true soft start
and stop operation
- Control box can be mounted in protected area
away from receiver (may require longer cables)
- Large heavy gauge steel
"smart" control box with black powder coated finish measures 19" high x 18-1/4" wide x 8-1/4" deep
- Control box houses control board and a common
12V automotive or marine battery. Plenty of room for additional devices such as entry and
safety controllers.
- Receiver unit with antenna and 10' cable can
be placed in best location for reception of signal
- Can be operated by remote transmitter,
digital keypad, push button or combination
- Full systems capable, single/dual control board includes
adjustable obstruction sensing, gate sequencing, and auto close settings (0-120 seconds).
- One button auto-memorization of digital
transmitter code.
- Full access ready package includes radio
receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a
standard installation. Battery not included.
- Can operate as 'push to open' or 'pull to
open' (specify when ordering - extra hardware required for push to open)
- UL rated for Class I, II, III & IV.
System certified to be in compliance with UL 325, 5th edition.
- Two-year limited warranty applies to
replacing parts from GTO, Inc.
- 30 day satisfaction guarantee from Hoover
Fence
Technical Specifications:
- Powered by resilient 12 volt (120 Watt) DC motor, 64:1
planetary gear drive system.
- Temperature rating of motor: -5ºF (-20ºC) to +160ºF
(+71ºC)
- Opening time is from 15 seconds.
- Range of arm stroke is up to 16" (41 cm), operator
length with arm fully retracted is 40.25" (102 cm), mounting point to mounting point.
|
- The PRO-SW3000XL-LCB system requires a large automotive or
marine battery (not included).
- Maximum battery backup power, great for solar applications.
- Battery charge maintained by a 120V AC/60
Htz input and 18V AC at 40 VA output, transformer rectified to 14 V DC through the GTO
Control Board.
- Optional GTO Solar Panel Charger: float voltage 14.5 V DC
output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents
battery discharge.
|
- The GTO control board can be programmed for pull-to-open or
push-to-open.
- Adjustable auto close, obstruction sensitivity and dual gate
sequencing.
- Slow Start/Stop for added cycles and system life.
- One button auto-memorization of digital transmitter code.
- Charging regulated circuit on control board. "Sleep
draw" is 40 mA; "active draw" is 2 to 9 amps.
- GTO/PRO remote-mounted 318 MHz RF receiver and one button
transmitter included.
|
Includes:
- Operator arm
- AC transformer
- Control box/control board
- Receiver with 10 ft. cable
- Entry transmitter
- 6 ft. power cable
- Mounting hardware
- Installation/safety manual
- Caution signs.
- Warning Beeper
- Adjustable obstacle-reversing safety feature
|
GTO/PRO SW3000XL-LCB
|
Product
Code: PRO-SW3200XL
GTO Slave Operator for PRO3000XL-LCB
Add this unit to the PRO3000XL-LCB above and your system will
operate a double swing gate up to 32' wide (16' each leaf), minimum gate size 10' wide (5'
each leaf). Burying the power cable directly across the driveway is fine. It can be snaked
through conduit also. Cable is 1/4 inch diameter with a 1 inch plug on one end only.
Includes:
- Operator arm
- 40' power cable - wires into the control box of the
PRO3000XL-LCB
- Mounting hardware
- NOTE: This operator will not work as a stand-alone
unit. It is a slave unit without a control box and is meant to hook up to the PRO3000XL
control box for use with a double gate.
|
GTO/PRO SW3200XL
|
Included parts
PRO-SW3000XL/3200XL
Installation Manual
SW3200XL-LCB Swing Gate Operator
$524.25 595.00
Add To
Cart || View Cart
includes ground shipping to USA. Hawaii
and Alaska extra.
or by phone: 800-355-2335 toll free
|
