|
C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm
|
Product Code: PRO-SW3000XL
 GTO/PRO Swing Gate Operator |
PRO3000XL and PRO3200XL
for Double Gates Shown
|
Low Voltage Swing Gate Operator designed for tubular steel,
vinyl, wood, or ornamental gates. The enhanced motor design provides an extended cycle
life, ideal for single family estates, housing complexes of up to twenty multi-family
units or equivalent commercial applications. The PRO3000XL is for single swing gates. Add
the slave unit PRO3200XL for a double swing gate (below). Features GTO's true soft start
and stop operation and a fast open/close speed as low as 15 seconds. For general operator
information, read our frequently
asked questions page for more information. If you still need help, e-mail sales@hooverfence.com.
Note: This operator is also available in single and double gate operator
kits which include not only the operator(s), but also popular compatible accessories.
Click here
for more information on the kits.
 12 volt system, no
electrician needed for installation- Gate will work during electrical power
outage
- Quick and easy installation, with user
friendly instructions
- Solar Panel Charger available for remote
locations
- Will operate a gate up to 16' wide and weighing up to 650
lbs. each leaf (minimum size gate 5' wide each leaf)
- Can operate 90 to 190 gate cycles during
peak hours of operation, depending on gate size and weight (see cycle chart link below)
- Control box can be mounted in protected area
away from receiver (may require longer cables)
- Control box measures 18-1/2" high x 14-1/4" wide x 7-1/2" deep
- The PRO3000XL is also available with a large steel control box
designed to house an automobile or marine battery for extra reserve power, as well as more
room for entry and safety controllers. It is available as the PRO3000XL-LCB.
- Receiver unit with antenna and 10' cable can
be placed in best location for reception of signal
- Can be operated by remote transmitter,
digital keypad, push button or combination
- Full systems capable "add on ready" heavy-duty
control board includes adjustable obstruction sensing, gate sequencing and auto close
settings (0-120 seconds).
- High cycle capability with true soft start and stop
operation
- Full access ready package includes battery, radio receiver,
entry transmitter, AC transformer, and all necessary mounting hardware for a standard
installation.
- Can operate as 'push to open' or 'pull to
open' (specify when ordering - extra hardware required for push to open)
- UL rated for Class I, II, III & IV. System certified to
be in compliance with UL 325, 5th edition.
- Two-year limited warranty applies to
replacing parts from GTO, Inc.
- 30 day satisfaction guarantee from Hoover
Fence
Technical Specifications:
- Powered by resilient 12 volt motor, 64:1 planetary gear
drive system.
- Temperature rating of motor: -5ºF (-20ºC) to +160ºF
(+71ºC)
- Opening time is 16-20 seconds.
- Range of arm stroke is up to 16" (41 cm), with arm
fully retracted is 40.25" (102 cm), mounting point to mounting point.
|
- The PRO-SW3000XL system is powered by a 12 volt DC/7.0 amp
hour, sealed, rechargeable battery (included).
- Optional second battery fits in control box, used for solar
applications or high traffic applications, if needed
- Battery charge maintained by a 120V AC/60 Htz input,
transformer rectified to 14 V DC through the GTO Control Board. NOTE: Transformer
should never be connected directly to any battery.
- Optional GTO Solar Panel Charger: float voltage 14.5 V DC
output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents
battery discharge.
|
- The GTO control board can be programmed for pull-to-open or
push-to-open.
- Adjustable auto close, obstruction sensitivity and dual gate
sequencing.
- Slow Start/Stop for added cycles and system life.
- Auto-memorization of digital transmitter code.
- Charging regulated circuit on control board. "Sleep
draw" is 40 mA; "active draw" is 2 to 7 amps.
- GTO remote-mounted RF receiver tuned at 318 MHz.
|
Includes:
- Operator arm
- AC transformer
- 12 volt battery
- Control box/control board
- Receiver with 10 ft. cable
- Entry transmitter
- 6 ft. power cable
- Mounting hardware
- Installation/safety manual
- Caution signs.
- Warning Beeper
- Adjustable obstacle-reversing safety feature
|
GTO/PRO SW3000XL
|
Product
Code: PRO-SW3200XL
GTO Slave Operator for PRO3000XL only
Add this unit to the PRO3000XL above and your system will
operate a double swing gate up to 32' wide (16' each leaf), minimum gate size 10' wide (5'
each leaf). Burying the power cable directly across the driveway is fine. It can be snaked
through conduit also. Cable is 1/4 inch diameter with a 1 inch plug on one end only.
Includes:
- Operator arm
- 40' power cable - wires into the control box of the PRO3000XL
- Mounting hardware
- NOTE: This operator will not work as a stand-alone
unit. It is a slave unit without a control box and is meant to hook up to the PRO3000XL
control box for use with a double gate.
|
GTO/PRO SW3200XL
|
Included
parts
PRO-SW3000XL/3200XL
Installation Manual
PRO-SW3200XL Swing Gate Operator
$524.25 595.00
Add To
Cart || View Cart
includes ground shipping to USA. Hawaii
and Alaska extra.
or by phone: 800-355-2335 toll free
|
