|
C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm
|
This
operator has been discontinued, you will be redirected to the new and improved
PRO-SW4000XL or click here
to go to the page now.
Product Code: PRO-SW4000
 GTO/PRO Swing Gate Operator |
PRO4000 and PRO4200
for Double Gates Shown
|
Low Voltage Swing Gate Operator designed for tubular steel,
vinyl, wood, or ornamental gates for residential, farm and commercial use. The PRO4000 is
for single swing gates. Add the slave unit PRO4200 for a double swing gate (below). Read
our frequently asked
questions page for more information. If you still need help, e-mail sales@hooverfence.com
- 12 volt system, no electrician needed for
installation
- Gate will work during electrical power
outage
- Quick and easy installation, with user
friendly instructions
- "The Shadow" is designed to blend
in with your gate
- Solar Panel Charger available for remote
locations
- Will operate a gate up to 20' long and weighing up to 1000
lbs. each leaf
- Can operate 100 to 150 gate cycles during
peak hours of operation, depending on gate size and weight (see cycle chart link below)
- Control box can be mounted in protected area
away from receiver (may require longer cables)
- Control box measures 18-1/2" high x 14-1/4" wide x 7-1/2" deep
- Receiver unit with antenna and 10' cable can
be placed in best location for reception of signal
- Can be operated by remote transmitter,
digital keypad, push button or combination
- Full systems capable "add on ready" heavy-duty
control board includes adjustable obstruction sensing, gate sequencing and auto close
settings (0-120 seconds)
- High cycle capability with true soft start and stop
operation
- Full access ready package includes battery, radio receiver,
entry transmitter, AC transformer, and all necessary mounting hardware for a standard
installation
- Can operate as 'push to open' or 'pull to
open' (specify when ordering - extra hardware required for push to open)
- UL rated for Class I, II, III & IV. System certified to
be in compliance with UL 325, 4th edition
- Two-year limited warranty applies to
replacing parts from GTO, Inc.
- 30 day satisfaction guarantee from Hoover
Fence
Technical Specifications:
- Powered by resilient 12 volt motor, 64:1 planetary gear
drive system.
- Temperature rating of motor: -30ºF (-34ºC) to +160ºF
(+71ºC)
- Opening time is 18-20 seconds
- Range of arm stroke is up to 22" (56 cm), with arm
fully retracted is 46.25" (118 cm), mounting point to mounting point
|
- The PRO-SW4000 system is powered by a 12 volt DC/7.0 amp
hour, sealed, rechargeable battery
- Optional second battery fits in control box, used for solar
applications or high traffic applications, if needed
- Battery charge maintained by a 120V AC/60 Htz input,
transformer rectified to 14 V DC through the GTO Control Board. NOTE: Transformer
should never be connected directly to any battery
- Optional GTO Solar Panel Charger: float voltage 14.5 V DC
output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents
battery discharge
|
- The GTO control board can be programmed for pull-to-open or
push-to-open
- Adjustable auto close, obstruction sensitivity and dual gate
sequencing
- Slow Start/Stop for added cycles and system life
- Auto-memorization of digital transmitter code
- Charging regulated circuit on control board. "Sleep
draw" is 40 mA; "active draw" is 2 to 9 amps
- GTO remote-mounted RF receiver tuned at 318 MHz
|
Includes:
- Operator arm
- AC transformer
- 12 volt battery
- Control box/control board
- Receiver with 10 ft. cable
- Entry transmitter
- 6 ft. power cable
- Mounting hardware
- Installation/safety manual
- Caution signs.
- Warning Beeper
- Adjustable obstacle-reversing safety feature
Picture of included parts
Cycle Chart
for use with transformer provided
PRO-SW4000 Installation Manual
$0.00 Add To
Cart | View Cart
includes ground shipping to USA. Hawaii
and Alaska extra.
or by phone: 800-355-2335 toll free
Product
Code: PRO-SW4200
GTO Slave Operator for PRO4000 only
Add this unit to the PRO4000 above and your system will
operate a double swing gate up to 40' wide (20' each leaf). Burying the power cable
directly across the driveway is fine. It can be snaked through conduit also. Cable is 1/4
inch diameter with a 1 inch plug on one end only.
Includes:
- Operator arm
- 50' power cable - wires into the control box of the PRO4000
- Mounting hardware
- NOTE: This operator will not work as a stand-alone
unit. It is a slave unit without a control box and is meant to hook up to the PRO4000
control box for use with a double gate.
Picture of included parts
PRO-SW4200 Installation Manual
$0.00 Add To Cart || View Cart
includes ground shipping to USA. Hawaii
and Alaska extra.
or by phone: 800-355-2335 toll free
|
