|
C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm
|
Product Code: PRO-SW4000XL-LCB
 GTO/PRO Swing Gate Operator |
PRO4000XL-LCB and PRO4200XL
for Double Gates Shown
|
Low Voltage Swing Gate Operator designed for tubular steel,
vinyl, wood, or ornamental gates. The enhanced motor design provides an extended cycle
life, ideal for single family estates, housing complexes of up to twenty multi-family
units or equivalent commercial applications. The PRO4000XL-LCB is for single swing gates.
Add the slave unit PRO4200XL for a double swing gate (below). Features GTO's true soft
start and stop operation and a fast open/close speed as low as 18 seconds. The 4000XL-LCB
is the same operator as the 4000XL,
only it comes with a larger metal control box that will hold a common automotive or marine
battery for maximum reserve power (battery not included). The large control box provides
ample room for optional access and safety device controls. For general operator
information, read our frequently
asked questions page. If you still need help, e-mail sales@hooverfence.com.
 12 volt system, no electrician needed for installation- Gate will work during electrical power
outage
- Quick and easy installation, with user
friendly instructions
- "The Shadow" is designed to blend
in with your gate
- Solar Panel Charger available for remote
locations
- Will operate a gate up to 20' wide and weighing up to 1000
lbs. each leaf if all proper installation procedures are followed. Minimum size gate for
this operator is 8' wide each leaf. Note: Ball bearing hinges should be used on all
gates weighing over 250 lbs (113.4kg).
- High cycle capability with true soft start
and stop operation
- Control box can be mounted in protected area
away from receiver (may require longer cables)
- Ideal for column mount applications with up
to 19" of offset
- Large heavy gauge steel
"smart" control box with black powder coated finish measures 19" high x 18-1/4" wide x 8-1/4" deep
- Control box houses control board and a common
12V automotive or marine battery. Plenty of room for additional devices such as entry and
safety controllers.
- Receiver unit with antenna and 10' cable can
be placed in best location for reception of signal
- Can be operated by remote transmitter,
digital keypad, push button or combination
- Full systems capable, single/dual control board includes
adjustable obstruction sensing, gate sequencing, and auto close settings (0-120 seconds).
- One button auto-memorization of digital
transmitter code.
- Full access ready package includes radio
receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a
standard installation. Battery not included.
- Can operate as 'push to open' or 'pull to
open' (specify when ordering - extra hardware required for push to open)
- UL rated for Class I, II, III & IV.
System certified to be in compliance with UL 325, 5th edition.
- Two-year limited warranty applies to
replacing parts from GTO, Inc.
- 30 day satisfaction guarantee from Hoover
Fence
Technical Specifications:
- Powered by reliable 12 volt (120 watt) DC motor, 64:1 planetary gear drive system
- Temperature rating of motor: -5ºF (-28ºC) to +160ºF
(+71ºC)
- Opening time is around 18-24 seconds, depending on the size
and weight of the gate
- Range of arm stroke is up to 22" (56 cm), with arm
fully retracted is 46.25" (118 cm), mounting point to mounting point
|
- The PRO-SW4000XL-LCB system requires a large automotive or
marine battery (not included).
- Battery charge maintained by a 120V AC/60 Htz input and 18
VAC at 40 mA; "active draw" is 2 to 9 amps. NOTE: Transformer should never be
connected directly to any battery
- Optional GTO Solar Panel Charger: float voltage 14.5 VDC
output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel.
Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents
battery discharge
|
- The GTO control board can be programmed for pull-to-open or
push-to-open
- Adjustable auto close, obstruction sensitivity and dual gate
sequencing
- Slow Start/Stop for added cycles and system life
- One button auto-memorization of digital transmitter code
- Charging regulated circuit on control board. "Sleep
draw" is 40 mA; "active draw" is 2 to 9 amps
- GTO/PRO remote-mounted 318 MHz RF receiver and one button
transmitter included
|
Includes:
- Operator arm
- AC transformer
- Control box/control board
- Receiver with 10 ft. cable
- Entry transmitter
- 6 ft. power cable
- Mounting hardware
- Installation/safety manual
- Caution signs.
- Warning Beeper
- Adjustable obstacle-reversing safety feature
|
GTO/PRO SW4000XL-LCB
|
Product
Code: PRO-SW4200XL
GTO Slave Operator for PRO4000XL-LCB
Add this unit to the PRO4000XL-LCB above and your system will
operate a double swing gate up to 40' wide (20' each leaf), minimum gate size for this
operator is 16' wide (8' each leaf). Burying the power cable directly across the driveway
is fine. It can be snaked through conduit also. Cable is 1/4 inch diameter with a 1 inch
plug on one end only.
Includes:
- Operator arm
- 50' power cable - wires into the control box of the
PRO4000XL-LCB
- Mounting hardware
- NOTE: This operator will not work as a stand-alone
unit. It is a slave unit without a control box and is meant to hook up to the
PRO4000XL-LCB control box for use with a double gate.
|
GTO/PRO SW4200XL
|
Included
parts
PRO-SW4200XL
Installation Manual
PRO-SW4200XL-LCB Swing Gate Operator
$589.79 730.00
Add To
Cart || View Cart
includes ground shipping to USA. Hawaii
and Alaska extra.
or by phone: 800-355-2335 toll free
|
