Featuring the highest quality components and backed by years of proven dependability, each unit is carefully inspected and mechanically tested to provide unsurpassed reliability. Unique engineering innovations in each model also ensure that there's a CSW to meet practically every swing gate application.

Three models available: CSW200UL with 1/2 HP, CSW200UL1HP with 1 HP (two 1/2 HP motors), CSW200UL with 1/2 HP w/Battery Backup. Order one operator for single swing gate applications, order two operators for double swing gate applications.

Mechanical Specifications

• Power - 120 VAC 4 amp
• Board - 24V DC
• Motor - CSW200UL 1/2 HP or CSW2001HP 1 HP, instant reversing
• Cycles - CSW200UL 75/hour or CSW2001HP 60/ hour
• Shipping Weight - CSW200UL 175 lbs. or CSW2001HP 199 lbs.
• Chain - #41 Chain
• Pulley - Solid steel, machined pulley
• Finishing - Gold zinc-plated chassis to eliminate corrosion
• Capabilities - Maximum gate size CSW200UL 18' wide and 600 lbs., CSW200UL1HP 20' wide and 1000 lbs.
• Output Shaft - 2-1/2" cold rolled steel
• Operator Travel Speed - 13 to 15 seconds 90º opening
• Approval - UL and ETL listed to the latest UL325 and UL991 specifications
• Dimensions - CSW200UL 15"w x 28"h x 20.5"d, CSW2001HP 15"w x 28"h x 24.5"d
• Manual Release - Release handle included with gate operator
• Warranty - 7 year single home application, 5 year for commercial application

Electrical Specifications

• Digital Motor Protection - Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches and stops.
• ERD - If the gate hits a vehicle while closing, it re-opens. If it hits a vehicle while opening, it stops, reverses 4 to 6 inches and stops again.
• Modular Board - Board uses LED's to indicate all input and output functions.
• Timer - Adjustable timer can be set from 0-60 seconds.
• Electronic Motor Disconnect - Prevents activation of the motor while under manual operation. Meets latest UL325 rev. 5 standards.
• Power Input on/off Switch - Controls power input to the board with convenient switch.
• Power Management - Board includes electronic power management with over-current shutdown and automatic recovery.
• Intelligent Master/Slave - Precise, synchronized movement and communication between two gate operators using 3-wire RS485 bi-directional technology.
• Gate Traveling Time - Adjusted by a precision mechanical device and electrical limit switch system
• Soft Stop - Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy.
• Safety Loop Input - Easy to install, modular, plug-in-loop detector input for exit loop and safety loop.
• 120V AC Power - Built-in 120V AC power receptacle (NEMA 5-15)
• Motor Drive - Solid-state electronic motor drive system is incorporated into board.
• Radio Receiver - Includes a built-in 312 HM radio receiver for use with Security+ remote controls. Allows for one LiftMaster remote control to conveniently open the gate and additional access points. You can find compatible remotes below or you can see our complete line of compatible LiftMaster transmitters and receivers here.
• Alarm Output - Activates anytime the moving gate is physically stopped by an obstruction.
• Surge Suppressors - Protected by surge suppressor board included.
• Alternate Outputs - With Omni Option board 3 push button command control, burglar alarm input and output. QCC option available
• Electronic Inputs - Radio receiver, key switch, safety loop, exit loop, telephone entry system, computer input, fire dept. key switch and 3 push button station.
• Housing Finish - Weather proof.
• Control Board Housing Finish - Entire housing is polyethylene plastic.

More Information (PDF):

• CSW200UL Series Manual
• CSW200UL Series Brochure
• Mounting Plate (optional)

Typical CSW200UL Single Swing Gate Installation (click to enlarge)

Typical CSW200UL Double Swing Gate Installation (click to enlarge)

or by phone: 800-355-2335 toll free