1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Return | Edge Index
  Miller Universal - Wireless Transmitters / Receiver
The MWR03 is a three channel receiver and is designed to work with most gate and commercial door operators. This receiver is designed to receive transmissions from up to three different input devices. It has a range of up to 100 feet and as an added bonus, the antenna is removable and can be moved (using coaxial cable) to a new location for better reception if needed. The MWR03 is compatible with both gate/ door transmitters, MWTA02 (alarmed) and MWT02 (no alarm).

The Miller Edge Model MWTA12 and MWT12 gate and door edge transmitters are designed to provide obstacle sensing protection for a variety of motorized gates and doors. They are easily mounted and wired to the gate or door edge sensor. When the sensing edge comes in contact with an obstruction, a closed circuit signal is created and is sent to the transmitter. The transmitter relays the information to the receiver and the receiver passes the message along to the operator motor. The gate or door stops movement instantaneously and will then reverse the direction of travel.

The Model MWTA12 is available with an audible alarm feature that activates when the battery has only 25% of its life remaining, indicating the battery should be replaced.  The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.

Both models of the transmitter come standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

Both the Miller Edge receiver and transmitters are designed to have several selectable options not found on other radio controls. Simply select these options with the convenient dip switches and wire harness. The Miller single channel receiver operates on either 12 or 24 volt AC or DC and is capable of sending a pulse or continuous signal.  The three channel receiver operates on 24 volt AC or DC.

NWR03 Spec Sheet | NWR03 Installation Manual | Warranty
MWTA12 Transmitter Spec Sheet | MWTA12 Transmitter Installation Manual


     Click to enlarge!
Click to enlarge!
Click to enlarge!
Product Code Product Description Price View Cart
  Click Here for Information on a Miller Single Channel Receiver.    
MWR03 Three Channel Receiver 24 volt AC or DC $ Add to Cart
MWTA12 Transmitter with Audible Alarm (for gate) $ Add to Cart
MWKT01 Mini-Transmitter Discontinued

View Shopping Cart | E-mail us with questions | Edge Index