Jerith Ornamental Aluminum Fence - Style Symphony Pool Fence

Style #7S (Jerith Symphony)

Click here for prices

About this style:

The Symphony style uses larger rails and pickets to meet most swimming pool enclosure codes without sacrificing strength.
Similar to the Ovation style (#7) but with pickets extending above the top rail.
Choice of finials
All Symphony style gates are equipped with a magnetic safety latch (shown right) with a built-in key lock as the standard latch.
Sections are shipped fully assembled (click here for more information) except for finials that are field installed.
Posts and gates are sold separately.
Actual fence height ordered is 1/2" less than height shown.
Post spacing is 72-1/2" on center.
Sections can rake about 24" over their 6' span.
Post prices include flat caps. Optional ball caps available for more pleasing appearance.
Available in 3 colors: Black, White, Bronze and Green
Picture at right shows Symphony style with Imperial finials and Accent Gate.
Most items ship within 1 week - more info
Specifications - [52"]

About the gates:

Use gate posts on both sides of gates
4" gate posts are recommended for gates over 5 feet in width, especially when a gate operator is to be used
Swing gates are preassembled and include self-closing and self-latching hardware
Double drive gates up to 12' wide can be made using 2 of the gates in the price list. For wider, fancier gates, click here.
Two drop rods are provided at no additional charge when a double drive gate is ordered
Accent Gates available for this style, single walk gate with arched top
Rainbow Gates available for this style, double walk gate with continuous arched top across both gates.

Available Colors	black, white, bronze and green
Self-closing and latching gates	included
Picket Spacing	3-11/16" between pickets
Post size/wall	2" square/.060" thick (2-1/2" posts available upon request)
Finials Available	no (pinched point pickets)
Child-safety handle mechanism	included
Panel width	72-1/2" post centers
Gate post size/wall	2" square/.125" thick
Raking (out of sq. for slopes)	24" per panel
Available heights	52" only
Picket size/wall	(15) 3/4" sq. x .050" thick wall
Rail Size/wall	1" x .055" top/1-1/2" x .082" side
Weight supported	350+ lbs.
Prerouted holes in posts	yes
Fasteners	stainless steel
Paint	powder-coat - lifetime warranty
Gates include hardware	yes
Shipping	continental USA - FREE over $ purchased