1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Step 5: Secure Rails

back Back    To Installation Overview Next

1.   After the concrete has set, fasten the rails to the posts using the 1" self drilling screws.

CAUTION: Do not over tighten the 1" screws - You can break them!  If you use a powered drill, adjust the clutch to prevent the screws from denting or marring the finish.

 He's not a real fencer, he just plays one on TV!     

Above: Hoover Fence's Jim Beutler shows how to secure the rails to the posts using a drill and the Tek screws.
2.  Fill in the top of the post holes with dirt and grass so the fence will look like it's been there for years.

Your fence is now complete!



finished.jpg (9618 bytes)

Copyright 1998 Hoover Fence Co. All rights reserved.