Jerith Features and Accessories - Hoover Fence Company

	FLAT CAPS Flat Caps come standard with all posts. They can be replaced with Ballcaps if desired.		WALL MOUNT BRACKET These brackets are used to mount the rails to a flat surface such as an unrouted post, a wall, or a column.
	RAILS/POSTS Jerith rails are inserted into pre-routed holes in the post and are secured with supplied stainless steel post clips. Screwless design is attractive from both sides of the fence. Jerith residential shown, industrial styles use screws to fasten rails to post.		ADJUSTABLE WALL MOUNT BRACKET These brackets are used to mount rails to a flat surface at an angle other than 90°.
	PICKETS WITH PINCHED POINTS Pinched points come standard on most Jerith fence pickets. The exception would be styles that have finials. Pickets come preassembled with an attractive screwless design where the picket fastens to the rails.		RINGS Rings can be added between the top rails and pickets. Regency features styles # 51, #53 and #55 as shown, residential styles can also accept rings but they have approximately 1"gap top and bottom.
	DECK MOUNT CASTING Deck mount castings can be used to mount posts to a flat surface such as concrete or decks. Posts with welded plates are also available to simplify installation when mounting to flat surfaces.		SCROLLS Scrolls are available in four colors including gold. Scrolls fit on top of rails, between pickets and top rails, and between pickets under top rails. Gives your fence or gate a unique look.
	FINIALS Finials come in three styles. Shown from left to right is the Imperial finial, Victorian finial, and Majestic finial. Finials come in black, green, white, bronze or gold as shown here. Finials are available for styles #3, 5, 7S, #9, #10, #54, #55 and #73.		BALLCAPS Ballcaps can be installed on posts when the standard flat cap isn't being used.
	LATCH All Jerith walk gates come with a self-closing latch. Latch is powder coated to provide years of trouble-free use. A child-proof latch is recommended for pool areas.		TOUCH-UP PAINT Scratches and marred surfaces can be touched up with spray can paint (4.5 oz.) or brush on paint (.6 oz.).
	SELF-CLOSING HINGES All Jerith walk gates come with self-closing hinges. Provided with a powder coated finish and stainless steel screws to perform for years to come. Self-closing latches are a must for pools or areas children should not enter without adult supervision.

Jerith Aluminum fence products are guaranteed for life against defects in workmanship and/or materials and will never rust. Jerith components are extruded from an aluminum alloy and the residential styles are assembled with a screwless design that is attractive from both sides of the fence. Industrial styles still use stainless steel screws with painted heads to match the fence finish. Accessories are fully powder coated to match the fence color. The FencCoat™ powder coated finish on all fencing by Jerith Aluminum is unconditionally guaranteed against peeling, cracking , chipping or blistering for as long as you own your fence.