Aluminum Fence Styles RESIDENTIAL FEATURES & ACCESSORIES
FLAT CAPS Flat Caps come standard with all posts. They can be
replaced with Ballcaps if desired.
MOUNT BRACKET These brackets are used to mount the rails
to a flat surface such as an unrouted post, a wall, or a column.
RAILS/POSTS Rails are inserted into
pre-routed holes in the post and are secured with supplied stainless steel screws to fasten rails to post.
SWIVEL WALL MOUNT
BRACKET These brackets are used to mount rails to a
flat surface at an angle other than 90°.
WITH PINCHED POINTS Pinched points come standard on
fence pickets. The exception would be styles that have finials. Pickets come
preassembled with pickets screwed to the rails.
RINGS Rings can be added between the top rails and
pickets on most styles. They are field mounted to the fence sections but are
factory mounted on the welded gates.
POST FLANGE Post flanges can be used to mount
posts to a flat surface such as concrete or decks. Posts with welded plates
are also available to simplify installation when mounting to flat surfaces.
BUTTERFLY SCROLLS Butterfly Scrolls are available
that fit on the pickets. Gives your fence or gate a unique look.
Estate Scrolls are also available, much larger and fills up an area between the top
rails and bottom rail.
FINIALS Finials come in
two styles. Shown on the left is the Triad finial, on the right is the Quad
BALL CAPS Ball Caps can be installed on posts when the
standard flat cap isn't being used.
LATCH All walk gates come with a
self-closing latch. Latch is powder coated to provide years of trouble-free use. A child-proof latch is recommended
for pool areas.
SELF-CLOSING HINGES All walk gates come with
self-closing hinges. Provided with a powder coated finish and stainless steel screws to
perform for years to come. Self-closing latches are a must for pools or areas children
should not enter without adult supervision.
Hoover's Choice fence products are guaranteed for life
against defects in workmanship and/or materials and will never rust. Components
are extruded from an aluminum alloy and fasten together with stainless steel
screws that can not be seen from the outside of the fence. Screws match
the color of the fence. Accessories are fully powder coated to match the fence
color. The powder coated finish on all fencing and accessories is unconditionally guaranteed against peeling, cracking
, chipping or blistering for as long as you own your fence.