Model LRA/LRA2 Swing Gate Operator
Residential

LRA/LRA2 Specifications / Features

Cabinet:

• Aluminum housing provides protection from the elements without rusting
• Sleek design with no motor or gear protruding from the arm
• Silver Finish
• NEMA 4 fiberglass enclosure
• Paintable to match any decor

Mechanical:

• APeX controller with outdoor-rated fiberglass enclosure
• Controller pre-configured for two arms (order LRA and LRA2 for dual arm installation)
• Maximum Leaf Width - 16ft. per gate leaf
• Maximum Leaf Weight - 600lbs. per gate leaf
• Magnetic switches for limit setting
• 16" stroke length
• Capable of 60 cycles per day
• Gate Opening Speed - 15-18 seconds
• Can be used in left-hand or right-hand swing gate installs
• Cycles per day - 60
• LRA Shipping Weight - 50lbs.
• LRA2 Shipping Weight - 28lbs.

Mounting:

• The operator is connected by a cable to an APeX electronic controller, which provides all connections for input and entrapment detection devices.
• Brackets attached to the gate and gate hinge post are for mounting the operator and to provide a mechanism to move the gate.

Anti-Entrapment/Detection Devices:
Integrated entrapment sensing system with digital set point for quick and enhanced safety

Electrical:

• 24-VDC Motor
• Integrated entrapment sensing system with digital set point for quick and enhanced safety
• LED diagnostic display for ease of setup and troubleshooting
• Regulated 24 volt DC power available for access control accessories
• Integrated auto close timer (0-9 minutes)
• Built-in networked dual gate capability using 3-wire shielded cable
• Advance soft start/soft stop motor control
• Selectable fail-safe or fail-secure modes of operation
• The controller is housed in separate enclosure and contains a built in radio receiver for wireless activation by remote control transmitters
• 5' cable on LRA, 40' cable on LRA2

APeX Controller:

• European-style field wiring connectors with easy-to-understand graphics
• Intuitive controls with no dipswitches or potentiometers, for simple configuration
• Fully integrated MegaCode radio receiver
• UL325/UL991 compliant

Battery Backup:

• Dual 7ah batteries charged by 115 VAC
• Charging circuit automatically switches to batteries when AC is removed, and normal AC operation when power is restored

Warning Signals:

• Integrated programmable warning beeper during gate movement
• Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
• Continuous tone entrapment alarm with reset button

Warranty:

• The LRA/LRA2 is backed by a manufacturer's 2-year warranty.

Applications:

• Standard Pull-to-Open Diagram
• Optional Push-to-Open Diagram (PDF)

Manual:

• LRA Gate Operator Manual (PDF)
• LRA Gate Operator Brochure (PDF)

WARNING: All electric powered gates should have electric       
edge or photo electric control for safety. Purchased separately