
We accept checks by fax or phone. Order on our secure server online!
All Linear/OSCO products are available using our convenient shopping cart or call 800-355-2335Model SWR Swing Gate Operator
Residential


Footprint 18.25" x 23".
Dimensions.
Click images to enlarge. |
 |
SWR Specifications / Features
Cabinet:
- Durable, weather-resistant, UV-stabilized polyethylene
one-piece cover
- Removable and lockable steel access door
- Cabinet available in black only.
Mechanical:
- Heavy-duty, zinc plated, steel chassis
- Right-angle gear reducer
- One-inch diameter output shaft
- Optional adjustable torque limiter available
- Heavy-duty pillow block bearings
Mounting:
- Pad mounting standard
- Optional post mounting kit available
Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and
non-contact detection devices such as contact edges and/or photo electric eyes.
Electrical:
1/2 hp medium-duty, 115
VAC or 230 VAC, single phase, thermally protected, open frame-resilient mount PSC motor
- Power on/off switch
- Emergency stop/reset button on front cover
- Duplex receptacle on 115 VAC units
- Three-button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable cam limit switches
- Fully compatible with our entire line of Gate Operator
Accessories including card control, loop
detectors, radio controls, and automatic closing devices
- Low voltage surge suppressor included
Control Circuit:
APeX controller includes
integrated radio receiver, plug-in loop detector capability, surge protection, and easy to
read labeling standard
- Solid state circuit board, 24 VDC
- LED diagnostic display for ease of setup and troubleshooting
- Inherent current sensing system
- Built in maximum run timer and auto close timer
- Right-hand/left-hand easy conversion
- Master/Slave - simple three-wire connection
- Entrapment alarm
- UL325/UL991 compliant
Warning Signals:
- Continuous tone entrapment alarm
- Warning beeper to sound when gate is moving
- Pre-start audio/visual outputs included
Manual:
Warranty:
- The SWR is backed by a manufacturer's 5-year warranty.
WARNING: All electric powered gates should have electric
edge or photo electric control for safety. Purchased separately
| Model |
HP |
Voltage/
Phase |
Max.
Gate
Width |
Max.
Gate
Weight |
Opening
Speed |
Shipping
Weight |
Max.
Cycles |
View
Cart |
| SWR-211 |
1/2 |
115
VAC/1 |
15 ft. |
500 lbs. |
11-14 sec. |
125 lbs. |
150/day |
$
Add to
Cart |
| SWR-221 |
1/2 |
230
VAC/1 |
15 ft. |
500 lbs. |
11-14 sec. |
125 lbs. |
150/day |
$
Add to
Cart |
|
PRICES INCLUDE SHIPPING |
CODE |
DESCRIPTION |
View
Cart |
|
LIN-MT-1B |
1-Button MegaCode
Block Coded Transmitter
(click here
for more compatible transmitters) |
$
Add
to Cart |
| 2500-2346 |
Plug-In Loop
Detector (click here
for loops) |
$
Add
to Cart |
| 2120-483 |
Post Mount Kit |
$
Add to
Cart |
| 2500-2116 |
Heater - 115V |
$
Add
to Cart |
| 2500-2117 |
Heater - 230V |
$
Add
to Cart |
| 2650-111-12 |
Cold Weather Package
for 115V SWR
(must be ordered with operator) |
$
Add to
Cart |
| 2650-112-09 |
Cold Weather Package
for 230V SWR
(must be ordered with operator) |
$
Add to
Cart |
| 2100-2041 |
Base Plate
(seals bottom of unit) |
$
Add
to Cart |
| 2650-117 |
Torque Limiter - 3" - with
bushing and sprocket
(factory installed) |
$
Add to
Cart |
| 2650-121 |
Torque Limiter - 5" - with
bushing and sprocket
(factory installed) |
$
Add to
Cart |
| 2500-2207 |
Low Voltage Surge Suppressor
(included with operator) |
$
Add
to Cart |
|
PRICES INCLUDE SHIPPING* |
|
* Shipping included when ordering with a gate operator.
Additional shipping charges may apply if ordered without an
operator. |
|