1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

   CAST LIGHTING INDEX

QUICK LINKS

 
CAST LED PERIMETER FENCE LIGHTS
Old world craftsmanship...today's technology
Security Lighting Fixtures for Perimeter Lighting

"Remarkable savings with award-winning LED perimeter lighting."
Winner of 7 security & lighting industry awards!
CAST LED Perimeter Lighting CPL1. Designed to be easily installed, require no maintenance, and to provide significant savings on materials, labor, and energy. Up to 80% savings compared to typical perimeter lighting. Glare-free and highly targeted to provide optimal lighting for security officers and cameras. The CPL1 Perimeter Light (265lm) sets the new standard for security lighting on chain link perimeter fence.


CPL1

CAST LED Perimeter Fence Lights CPL1
“The combination of low-wattage LED’s and extremely wide voltage range allow perimeter lighting runs up to 500 ft. per low-voltage wire.”

A low-voltage security lighting system comprised of rugged LED luminaires and a reliable power supply. Mounted on fence posts, these lights are simple and quick to install, and consume a fraction of the energy of traditional security lighting. Can also be used in any lighting application where long wire runs are required (such as wooded paths and piers). These luminaires have numerous applications for a variety of end users in both permanent and temporary installations.

Applications:
  • Commercial and Municipal Properties to illuminate long perimeters or pathways
  • Residential areas where perimeters need added security but must comply with strict dark-sky ordinances
  • Public Parks
  • Temporary Fence Providers
  • Event Providers
  • Construction Companies to secure construction sites
  • Aid and Relief Stations
  • Airport Perimeters
  • Energy Providers for power plants and substations
  • Law Enforcement to secure accident and crime scenes
  • Military - for permanent installations and rapid deployment settings
Features:
  • Rapid return-on-investment - can replace high-wattage flood lights
  • Provides no-glare lighting for security cameras and guards
  • Each fixture pole-mounted with 2-bolt saddle-clamp and built-in junction box designed to illuminate a 30-ft. section of fence.
  • Outdoor White Cree LED’s with a predicted life of 60,500 hours (10 years).
  • All components protected from dust and moisture - impervious to physical damage. Unbreakable cast metal construction.
  • Low-voltage eliminates risk of electric shock.
  • Extremely wide input voltage range - from 12 to 24 volts.
  • A single 24v wire-run powers 17 lights to illuminate 500 ft. of fence for less than $100 per year energy cost.
  • Dark-sky compliant - full-cutoff fixtures do not contribute to light pollution and light trespass.

More Information: Brochure | Specifications | Installation Manual | Installation Manual (SP) | Videos | Pictures



CPT300 / E1CPT300


CPT600 / E1CPT600

CAST LED Perimeter Lighting Transformers
CAST 24V Perimeter Lighting System Transformers are designed to power CAST Perimeter Lights (CPL1). These perimeter lights mount on chain link fence posts to provide a highly energy-efficient LED illumination of long perimeter fences. Transformers are available in four styles. The 300W and 600W 24 Volt transformers are available for 120V or 220/240V power supplies. All transformers have the common features listed below.
Features:
  • Resin-sealed toroidal core.
  • Built-in manual timer.
  • Photocell plug and enclosure knock-out to connect and mount optional photocells.
  • 24-volt tap with Low-Off-High switch to change 24-volt tap to 26-volt tap.
  • Secondary magnetic circuit breaker.
  • Stainless steel enclosure.
  • Lifetime warranty on enclosure and core.
  • 3-year warranty on timer and electrical components.
Available Transformers:

CAST Plug-In Photo Cells
CAST Lighting Photocells CTPC (120V) and E1CRPC (220V) attach to transformers to switch on power at dust. This is typically used in conjunction with a CAST Timer. Quick-connect to transformer photocell plug. Locking ring and nut secures unit in knock-out opening.

The CTRPC Photo Cell is a remote unit equipped with a 20' lead wire to allow for remote positioning of the photocell. Stainless steel mounting bracket and screws included.

Installation Instructions


CAST No-Ox Wire
Tin-Coated Marine Grade Lighting Wire is highly corrosion resistant and retains it's conductivity far longer than all-copper wire.
Wire is wound and shrink-wrapped in 250' or 500' spools.
Marked with feet remaining on roll.
UL Listed for direct burial.

Why Tin-Coated Wire?


Prices and Ordering - Free Shipping within lower 48 contiguous states!

  CAST LED PERIMETER LIGHTING FIXTURES

CODE DESCRIPTION PRICE VIEW CART
CPL1 CAST LED Perimeter Fence Light $ Add to Cart

  CAST 24-VOLT TRANSFORMERS (w/Built-In Timers)

CODE DESCRIPTION PRICE VIEW CART
CPT300 CAST 300 VA, 24-Volt Transformer $ Add to Cart
CPT600 CAST 600 VA, 24-Volt Transformer $ Add to Cart
E1CPT300 CAST 300 VA, 24-Volt Transformer (220/240-Volt) $ Add to Cart
E1CPT600 CAST 600 VA, 24-Volt Transformer (220/240-Volt) $ Add to Cart

  TRANSFORMER CONTROLS (Photocells)

CODE DESCRIPTION PRICE VIEW CART
CTPC CAST Photocell $ Add to Cart
CTPRC CAST Remote Photocell $ Add to Cart
E1CTPC CAST Photocell (220/240-Volt) $ Add to Cart

  CAST NO-OX WIRE (Tin-Coated)

CODE DESCRIPTION PRICE VIEW CART
CLW162500 CAST #16-2 No-Ox Wire, 500' Roll $ Add to Cart
CLW142500 CAST #14-2 No-Ox Wire, 500' Roll $ Add to Cart
CLW122250 CAST #12-2 No-Ox Wire, 250' Roll $ Add to Cart
CLW122500 CAST #12-2 No-Ox Wire, 500' Roll $ Add to Cart
CLW102250 CAST #10-2 No-Ox Wire, 250' Roll $ Add to Cart
CLW102500 CAST #10-2 No-Ox Wire, 500' Roll $ Add to Cart
CLW82500 CAST #8-2 No-Ox Wire, 500' Roll $ Add to Cart
PRICE SHOWN INCLUDES SHIPPING