Wall Mount Brackets
for Vinyl Fence
( Specs and Prices )
|
|
| Wall Mount Brackets are used to attach the fence's horizontal rails to an existing post or wall. They are available in 2 forms: with or without plate. The bracket with plate comes in white, tan and grey. The bracket without plate comes unfinished, it will not show when installed. Brackets may not come with mounting screws or you may not be able to use the ones that are supplied because the type of screw or bolt will differ depending on the type of material it is being mounted on. The bracket with plate is normally used between two stationary objects when a vinyl post cannot be installed such as existing walls, posts or brick columns. The bracket without plate is normally used when attaching fence to a wall and running into a vinyl post. The photos and illustrations below help to demonstrate how the brackets are used. Both brackets, with prices and dimensions, can be ordered at the bottom of this page. |
|
 (click to enlarge) |
| The images above show cases where only wall mount brackets with plates must be used and where brackets without plates can be used. The image on the left shows two columns with a fence section installed between them. In this case you must use brackets with plates. The fence section has to be a perfect fit and has no room for sliding the horizontal rails onto a bracket without plates. The image on the right is using brackets with plates on the column. Brackets without plates could have been used on the columns, sliding the rails into the hollow post and then sliding onto the bracket. The customer used all brackets with plates to keep the job uniform. |
|
|
|
