|Planter Installation Instructions (Large planter shown)|
|Begin by arranging end pieces on a clean flat surface as shown. Assemble unit by fitting end pieces into top and bottom rails and inserting subassembly into end posts. Insert caps into top of posts.|
|Stabalize ends by driving screws into top and bottom
rails through posts from the outside. NOTE: Screws come complete with cap assembly.
Push the screw through the cap washer so that it extends up from the screw head to
hold the cap. With screws secure, snap the cap into place.
|Arrange planter bottom as shown and assemble parts as in step 1.|
|Fit bottom subassembly into planter ends|
|Drive screws into bottom rails through end post securing bottom to posts.|
|Fit side panels into bottom and top panels and insert top into post as shown. secure with screws as with previous step.|