1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Return
VINYL INDEX
Vinyl Index
Vinyl Railing Index

Porch Posts
Porch Posts
Porch Post Storm Kit
Round Porch Columns
Square Porch Columns
Porch Post Cladding

Gingerbread Corners
Oak Scroll
Rose Scroll

Lamp Posts
Lamp Posts
Hollow Porch/Lamp Posts
Lamp Post Caps

Pergolas
Pergola Kits
Kit Specifications
Individual Components

Decking
Zip-Up UnderDecking

Pictures
Porch Posts and Railing
Round Columns and Railing
Pergolas

Accessories
Zip-Up UnderDecking
Post Caps
Spindles
 

 

Installation Instructions For Vinyl Cladding
STEP 1
Put your wood post in place.

STEP 2
Cut the 4 cladding pieces to the length that needs to be covered.

STEP 3
Fasten each cladding piece with #4 x 1" Stainless Steel Screws (not provided) approximately 24" apart.  You can only fasten one piece at a time.  When you go to install the last piece, snap into place and face screw into wood post.

Fasten each cladding piece with #8 x 1" Flathead Screws (provided) approximately 24" apart.  You Can only fasten one piece at a time.  When you go to install the last piece, snap into place and face screw into wood post.

 
If Trim Brackets are to be used, assemble in place around the top or bottom of post,  Screw brackets in place by screwing into the tabs with the same Flathead Screws (included).STEP 4
If Trim Brackets are to be used, assemble in place around the top or bottom of post. No screws are necessary, brackets use "ratchet" type system that holds the pieces together.