1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

Return
VINYL INDEX
Vinyl Index
Vinyl Railing Index
 




Elite
Vinyl Railing

Choosing Components
Installation Information

All About Brackets
FAQ
Elite Prices
Lifetime Warranty
Specifications
Elite Railing

Flat 3 Ft. High
Stair 3 Ft. High
Flat 3.5 Ft. High
Stair 3.5 Ft. High

Premium
Vinyl Railing

Choosing Components
Installation Information

All About Brackets
FAQ
Premium Prices
Lifetime Warranty
Specifications
Premium Railing

Flat 3 Ft. High
Stair 3 Ft. High
Flat 3.5 Ft. High
Stair 3.5 Ft. High


Porch Posts
Porch Posts
Porch Post Storm Kit
Round Porch Columns
Porch Post Cladding
Decorative Scrolls/Corners

Pergolas
Pergola Kits
Pergola Components

Lamp Posts
Lamp Posts
Lamp Post Caps

Accessories
Zip-Up UnderDecking
Post Caps
Spindles

Pictures
Vinyl Railing
Vinyl Porch Posts & Railing
Round Porch Columns

 


Kingston Vinyl Railing Systems
Installation Information

Metal-To-Wood (Normal Installation)
Post Support Kits (Alternative Installation)
Installation Manual (PDF)

Post Support Kits
Concrete or Wood

Mounting with posts supported by a steel support kit - Post support kits can be utilized where 4x4 posts are not used. Excellent system for mounting posts to concrete or decks.
Note: Vinyl posts alone do not provide adequate fastener retention. You must provide a wood or composite block inside the posts at bracket locations for proper fastener retention.

Kingston Alternative Installation - Post Support Kits
(click image to enlarge)

Kingston Alternate Installation
Steel support kits
  • Install concrete post support as directed (concrete kit shown at far left with flat bottom plates - wood kits also shown with 90 plates)
  • After attaching EZ-set brackets to post support, set 5/4"x3-5/8"x6" blocks above bottom EZ-set bracket on both sides of post
  • Slide vinyl post over blocks and brackets
  • Slide blocks into posts down to upper bracket
  • Install rails, balusters, and brackets. Be sure to screw brackets into areas reinforced by blocks

Post Support Kits - Included Parts
(click images to enlarge)

Post Support Kits
Included parts
  • Wood support kit shown at left - bottom plates fasten to deck joists
  • Both concrete and wood kits must be installed level, use washers under plates to plumb.
  • Check the installation manual for more information.

Concrete Installation - Click to enlarge!

Mounting
concrete kits

Wood Installation - Click to enlarge!

Mounting
wood kits