PARTS LIST:
1 - Porch Post
2 - Plates (top & bottom are the same)
8 - #10 x 1-1/2" Wood screws
4 - #10 x 1-1/2" Tapcon™ screws
STEP #1
Measure opening where post is to be installed. Deduct
3/8" from your measurement for the plates, to determine your post length.
NOTE:
For 42" Railing don't cut any off the bottom, just the top of the post.
For 36" Railing don't cut off more than 6"
at bottom, then balance off the top.
For 30" Railing don't cut off more than 12"
at bottom then balance off the top.
IMPORTANT!!!
When cutting bottom of post make sure your cut is the same pitch as slope of the base! Use
chop (mitre) saw with a carbide tipped multi-purpose blade.
|
