| Optional Step #3 UPLIFT STORM SUPPORT INSTRUCTIONS
Concrete or Wood Floor Installation
 This procedure is not necessary for
normal application of porch posts, only needed in situations such as when hurricane
strength winds are anticipated which could raise your roof off of the posts
Drill a 1/8" hole through the post and plate in
the middle opposing each other 5/8" from the deck and ceiling.
Screw post to plate using #10 x 1-1/2" pan head
white screws (included)
Optional modular trim sets can be used to cover
screws (see below)
If optional base plate feet adapter is being used
(see below); use 2-3/4" flat head Tapcon™ screws on concrete or 3" flat
head screws on wood (not included) |
