Vinyl Coated (PVC)
Chain Link Fabric
9 Gauge 2" Mesh Residential Vinyl Coated
With Steel Core of about 11 ga.
Chain link fabric is typically sold in 50' rolls. We
will cut rolls to exact size for local deliveries and pick-ups only.
Deliveries made out of state will receive full rolls. We recommend
ordering a few extra feet than needed. When more than 50' of fence is
needed for a stretch, rolls can be woven together easily. Chain link is
easily cut to size by removing one link.
Note about gauges:
The smaller the number, the heavier the fabric; henceforth 9ga. is
heavier than 11ga.. We recommend 11ga. for residential jobs and 9ga. for
commercial jobs. Heavier gauges are not only stronger, but have a better
finish; the heavier the gauge the longer it may be 'hot-dip galvanized'
to prevent rust and corrosion. Vinyl coated chain link is sold by the
finish gauge. 9 ga. chain link vinyl coated actually has a thinner inner
steel wire. It is considered 9 gauge once it has been coated, although
the inner steel wire is nearest 11 ga.
What is the difference
between 'Extruded' and 'Extruded and Bonded'? In layman's
terms, Extruded Vinyl, when cut with a knife, can be peeled off like a
banana. However, it does not peel easily. Extruded and Bonded Vinyl is
also adhered to the wire and would
have to be cut off completely, much like peeling a potato. Extruded and Bonded costs more than
Extruded, and is available here. Vinyl colors available in brown,
black, green, and white. Inquire about availability of white fittings.
Privacy Options with Chain Link
KxK = Knuckle x Knuckle, chain link top and bottoms are bent
KxB or KxT = Knuckle x Barb or Knuckle x Twist, chain
link is twisted at one end to form two barbs.
Stock Colors: Dark Brown,
Dark Green, Black and White.
Vinyl Extruded 2"
Gauge Chain Link Fence Fabric - 50' Rolls (CL-T120 &
CL-T144 have 1-3/4" mesh)
*Type: KxK = Knuckle end top and bottom, KxB =
Knuckle end bottom / Barb end top