Bufftech Kingston Rail Mount Brackets

Rail Mount Bracket System for the Kingston railing system. This system utilizes 4 x 4 treated wood posts along with vinyl blank posts, instead of routed posts. The vinyl posts slip over the wood posts. The rails are attached to the posts with screws using "Rail Mount Brackets". The rail mount brackets provide a sturdy metal-to-wood system that also meets the National building code approved NER-605. Brackets are available for flat and stair applications. Brackets are also made to mount to round columns, 22-1/2 degree and 45 degree applications.

Note: Sections already include the standard brackets (flat or stair respectively). You only need to order these brackets if you need more than what is included in your sections. A common reason for needing more is if you are cutting your panel down and using it as two sections.

All brackets sold in 4 packs (2 Top Brackets & 2 Bottom Brackets) except for round column brackets which are sold in 2 packs (1 Top Bracket & 1 Bottom Bracket). Order 1 Kit per Section.

• Normal installation for Kingston railing system
• Includes Brackets, Screws, Slide-over Trim Covers
• Standard brackets included with railing sections
• Posts slide over structural 4x4's (actual measurement 3.5"x 3.5")
• Aluminum brackets with vinyl covers: flat, stair, 45°, 22-1/2°, and column
• Listed with the ICC-ES as designated by the report ESR-1555
• Manufacturer's Lifetime Limited Warranty

Available Brackets for Kingston Railing:

Flat Brackets - Most common bracket used for all horizontal flat applications. Four brackets included with flat sections.

Stair Brackets - Bracket used for stair applications. Bracket end touching post must be field cut to match stair angle Example. Four brackets included with stair sections.

45° Brackets - Bracket used to mount adjoining section to post at a 45° angle. Normally used for angled corners.

22-1/2° Brackets - Bracket used to mount adjoining section to post at a 22-1/2° angle. Normally used to make a 'round' area of railing. Available as Left or Right.

Column Brackets - Bracket used to mount section of railing to a round column. One size available for all applications. Minimum 8" round column.