Oxford Railing Post Support Kits for Concrete Surface Installation
The Standard Routed System for Oxford railing consists of steel post supports inside 4 x 4 vinyl posts. The top and bottom rails slip inside routed holes in the posts. The aluminum channels inside the top and bottom rails attach to the post supports making a sturdy metal-to-metal system that meets the National building code approved NER-605.
Evernew Deck and Railing - Installation Manual (PDF)
A. Secure rail to wall with rail mount brackets. Decorative trim cover included.
B. Position steel support post. Mark location of anchor holes. Drill four (4) 1/2" holes, 3 1/4" deep in concrete pad. Assemble nut and washer on top of anchor. Position steel support post. Drive anchors through post flange into pad. Expand anchor by tightening nut 3 to 5 turns
C. Install the EZ-Set Brackets over the steel support post. Next, slip the vinyl post over the assembled post support assembly
D. Intall the railing section and use the Rail Lock Bracket to secure the top rail inside of the post.
Important: Railing system must be installed per manufacturer's specifications.
Anatomy of a vinyl railing system post on a concrete slab, with brackets.
There are no reviews yet. Be the first to Write a Review (requires login).