CAST Lighting CAST Perimeter Transformer with Astronomical Clock and 3rd Party Control

CAST Perimeter Transformer with Astronomical Clock and 3rd Party Control (CPT-DCAI)

The CAST Perimeter® Lighting DC Astronomical Input Transformer is a low voltage perimeter lighting 1200 Watt power supply designed to operate on a set program, or as part of an automated lighting solution to deter threats.

Two zone, dry contact closure (NO/NC) interfaces with third-party intrusion detection solutions to turn on/off lights. User-defined light control to deploy "Flash-Glare"™ feature to deter intruders.

Customized GPS on/off dusk to dawn control, days of the week programming.

Integrate with 3rd party perimeter detection systems using dry contact signals from cameras, motion, radar, laser, etc. to turn on/off lights to automatically activate, surprise, and disorient intruders without the involvement of on-site security guards!

High efficacy DC power, eliminates flicker, and produces crisp images that will reduce VMS storage and save money.

Auto-sensing primary power range from 100VAC to 277VAC accommodates virtually all available power: 115V, 120V, 230V, 240V, 208V, 277V, and European 220V1Phase. 47-63 Hz Range.

CAST Perimeter Transformer Features:
• Safe, simple low voltage power supply available in 1200 Watts.
• Outdoor mount, 304 stainless steel enclosure.
• Secondary short circuit protection. Automatic constant current limiting recovering after fault condition is removed.
• Provides 26 Volts DC secondary power under any load condition.
• Extra room to accommodate optional 125W 24V DC power supply for other perimeter devices, such as CCTV camera systems which can operate 24/7/365.
• Third-party activated power supply with GPS dawn to dusk control.
• Dry contact NO or NC signal wire or optional radio activation.
• Independent strobing flash programming down to one-second interval on and off run time.
• Strobe duration run time control from one minute to twelve hours.
• Lights on after strobe run time control from one minute to twelve hours.
• Two dry contact zone inputs for 3rd party intrusion detection system. Typical is pre-alarm zone and second zone closer to the fence is alarm-zone. Both with independent response programming and override feature.
• Allows lights to activate after NO or NC signal sent for user-defined duration from one minute to twelve hours.
• Seven-year warranty.