1-800-355-2335 |
Mon-Fri: 8:30am - 5pm EST |
Contact Us
5-foot CPT204-K-5 sensing edge kits include everything required for a 10K monitored or non-monitored installation, packaged in a convenient tube.
Bring top-tier safety and convenience to the job site with the Miller Edge 5-foot CPT204-K-5 sensing edge kit.
Cut your edge down to size and choose from 10K monitored or non-monitored configurations to customize your on-demand entrapment protection, in-the-field.
CPT204-K-5 - Sell Sheet (PDF)
| MG110 Sensing Edge Kit - Specifications | |
|---|---|
| Color: | Black |
| Length: | 5 ft. or bulk |
| Maximum Length: | 164 ft. (50 meters) |
| Sensitivity: | Nominal 2-4 lbf |
| Lead Wire: | SJTO, 22 gauge, 10 in. length |
| Wire Outlet Location : | Universal end plug |
| Electrical Maximum: | 24 volts AC/DC, 1/2 amp |
| Electrical Configuration: | Normally open |
| Operating Temperature: | Meets or exceeds UL requirement |
| Exterior Material: | Thermoplastic elastomer (TPE) |
| End Cap/Plug Material: | PVC |
| Contact Element: | Conductive polymer |
| Agency Approvals: | UL 325 Recognized Component |
CPT204 and CPT206 carry a 1-year warranty from date of shipment from Miller Edge for credit or replacement. This warranty applies to products installed for normal use, where the product is found to have defective materials or workmanship, as determined solely by an authorized factory representative. This warranty is void where evidence of misuse or abuse is present. This warranty covers repair or replacement of the purchased product only; product installation/labor charges are not covered. Miller Edge manufactures its products to meet stringent specifications and cannot assume responsibility for those consequences arising from improper installation or misuse. Installation instructions and testing procedures provided by Miller Edge must be followed for proper operation and maintenance.
There are no reviews yet. Be the first to Write a Review (requires login).
