EMX ULTRALOOP ULT-PLG Vehicle Loop Detector w/Pluggable Screw Terminal 12-24VDC

This ULTRALOOP™ Series Vehicle Loop Detector combines small size with full-featured functionality in a plug-in module. The ULTRALOOP ULT-PLG loop detector model has our new DETECT-ON-STOP™ or (DOS) feature, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces. The ULT-PLG provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. Our latest vehicle detector provides options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence. This detector is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™. Ten sensitivity settings allow for finer adjustment of the detection level. The four frequency selections help to prevent crosstalk in multi-loop applications. The ULT-PLG is compatible with a wide variety of gate operators.

• 12-24VDVC, works with a wide variety of gate operators (see spec sheet below)
• ULTRAMETER™ (displays optimum sensitivity setting / crosstalk interference)
• Pluggable screw terminal included
• Easy installation, set-up and troubleshooting
• DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
• Low current draw - green product
• Frequency count/reset switch
• 10 sensitivity settings
• Loop diagnostics
• 4 operating frequencies
• Lightning and surge protection
• Frequency counter
• Fail Safe or Fail Secure Operation
• Two relays (presence & pulse or presence)
• High intensity LED indicator
• Requires a loop to make a complete entry/exit device
• One loop detector is required for each function (ie. safety, free exit, free entrance)