Snug Cottage Hardware 13" Field Gate Pin to Bolt - Galvanized

13" Square Shouldered Gate Pin (8317-002)

13" Square Shouldered Gate Pins are used to prevent your pin from rotating within the post in a “behind the post” type installation. In this type of installation, the gate is constantly pulling to the side of the pin and the square shoulder of this pin prevents it from rotating in the hole which would cause your gate to sag.

This hardware is ideal for use with wood gates.

• Intended for use on wood applications.
• Available in 13" length only.
• Used to prevent pin rotation in a gate post.
• 3/4' dia. pin.
• Sold individually.
• Manufactured from forged steel.
• Available in Hot Dipped Galvanized finish.
• Traditional English Pin has Square Shaft at Pin End and has 3/4" Thread at Other End.
• Drill a 3/4" hole right through the post. Pin is driven into post until the thread protrudes from the opposite side. It is then drawn into the desired depth by tightening the nut.
• When Drawn into the Wood Post it Will Not Rotate.
• Ideal When Gate Mounted Behind the Posts.
li>Suitable for Posts 6 to 9 Inches Thick.